Raymarine GPS Receiver VolvoPenta IPS Autopilot System DPU User Guide |
Volvo Penta IPS System - Top Level Schematic
Fluxgate
Compass
ST6/7/8001
Control Head
IPS S3G
Course Computer
Data Processing Unit
(DPU)
to Volvo Penta
autopilot interface
D8065-1
s
Data Processing Unit - Parts Supplied.
Ferrite
(x5)
Terminator
Plug
Junction Box
5-way Junction Block
Tie Wraps
Data Processing Unit
(DPU)
Raymarine VP interface cable
(Connector to unterminated.
Supplied with the S3G)
SeaTalk Cable, 1 meter
to unterminated
2
SeaTalk Cable, 1.0 meter
Plug to unterminated
Grounding cable, 2 meters
Plug to unterminated
(supplied with the S3G)
2
NMEA 0183 Cable,
0.4 meter unterminated
SeaTalk Cable, 0.4 meter
Plug to unterminated (x2)
D8035-2
Autopilot Interface Kit - Volvo Penta part number 3819744
Tie Wraps
Autopilot Gateway - 3819743
Y-split cable - 3588206
MULTILINK
MULTILINK
D8036-1
5.9 in (150 mm)
1.53 in
(39 mm)
D5536-1
2
1
D5794-1
D5776-1
2
SeaTalk connector
SeaTalk
connector
D5786-2
Single power supply
SmartPilot
computer
Computer
power supply
(via breaker/fuse)
SeaTalk bus
SeaTalk instruments
SeaTalk
SmartPilot
controller
DPU
D9247-1
Separate SmartPilot computer and instrument power supplies
SmartPilot
computer
Computer
power supply
(via breaker/fuse)
SeaTalk bus
SeaTalk
SeaTalk instruments
SmartPilot
controller
SeaTalk
DPU
Instrument SeaTalk
Screen
Yellow
bus 12 V power supply
(via breaker/fuse
rated at 5 A or less)
Do not connect Red wire
(Cut back and insulate)
9 mm
50 mm
D5905-1
D5907-1
S3G Course
Computer Terminals
2
SeaTalk
1
2
3
MULTILINK
MULTILINK
4
MULTILINK
MULTILINK
5
MULTILINK
MULTILINK
CAUTION
DO NOT CONNECT
TO NMEA2000 BUS
|