Roadmaster Car Speaker RS570 680 User Guide

RS570-680  
5” x 7” Three-Way Speaker  
Frequently Asked Questions  
Installation  
What if there is no sound?  
Location  
Dear Customer,  
CONGRATULATIONS.  
1. Your stereo may have a blown fuse. Replace fuse with the same amperage and style.  
2. You may have improper wiring. Refer to the wiring guide that came with your ste-  
reo/amplier. Check all wires for a secure connection.  
If you are installing the RS570-680 speakers to upgrade/replace your existing speak-  
ers, remove the existing speakers from your vehicle, disconnect the speaker wires and  
mark the polarity. Place the RS570-680 speakers in the location you selected in your  
vehicle and connect the existing speaker wires. Make sure to keep the polarity of the  
speakers and wires correct (positive wire to positive speaker terminal and negative or  
ground wire to negative terminal)  
The RS570-680 5” x 7” 3-way speakers, when used as described, will give you years  
of dependable service in your car, truck, RV or mini-van. We have taken numerous  
measures in quality control to ensure that your product arrives in top condition, and  
will perform to your satisfaction. In the rare event that your RS570-680 5” x 7” 3-way  
speakers contain a damaged or missing item, does not perform as specied, requires  
warranty service, or you have an installation problem, DO NOT RETURN THIS PROD-  
UCT TO THE STORE. PLEASE CALL OUR TOLL FREE NUMBER FROM THE U.S.A.  
AND CANADA 1-800-445-1797 and ask to speak with a member of our technical ser-  
vice team, or submit your questions by E-Mail to [email protected] and a  
member of our technical service team will respond by E-Mail to your questions. Our  
in-house technical service team will expedite delivery of your part, advise you on  
installation, or help troubleshoot a problem with you. If your product needs warranty  
service, our technical service team representative will help you obtain the fastest rem-  
edy possible under the warranty.  
What if the sound volume is low?  
Your stereo may not have enough power, you may have to install an amplier to  
drive the speakers  
Why do I have a whining noise coming from the speakers?  
You may have poor ltering of your alternator. If that is the case then you  
may need to add an alternator lter to the power lead.  
Speaker Depth  
2.4”or6.1cm
Before you install your speakers you must make sure you have  
enough depth/space behind the mounting surface. You do not  
want the back of the speaker magnet to touch any part of your ve-  
hicle, or interfere with the operation or function of any component  
in your vehicle. (ie. windows or trunk lid)  
Why do I have odd sounding noises coming from the speakers?  
You may have corroded battery terminals and/or a weak battery. If the terminals on  
the battery are corroded clean them, then check the sound. If the sound system is  
still making noises check battery strength. If it is low recharge or replace the battery.  
Why does the speaker have sound coming from one channel only?  
First make sure the balance control is set correctly. If the balance is set correctly  
your stereo may be defective or the speaker may be defective. To troubleshoot  
this problem you MUST change both positive and negative leads of each channel  
with the positive and negative leads of the opposite channel, if the same speaker has  
no sound then the speaker is no good, if the opposite speaker has no sound then  
your stereo may be defective.  
Mounting  
Parts & Specications  
You should only mount your speakers in factory precut holes. We  
DO NOT recommend that you cut holes for mounting the speakers. If  
there are no factory precut holes consider having the speakers pro-  
fessionally installed.  
• 5” x 7” Polypropylene Coated Paper Cones  
• 10 Oz. Magnet  
• Foam Rubber Surrounds  
INTERIOR PANEL  
1. Connect the speaker wires to  
the speaker. Maintain polarity by  
connecting the positive wire to the  
positive speaker terminal, and the  
negative wire to negative speaker  
terminal.  
• 100 Watts Maximum Peak Power per Pair  
• 10 watts RMS Power per Pair  
• 110 Hz - 20,000 Hz Frequency Response  
• Bridgless 1” Midrange speakers  
• Dome Tweeters  
GIVE US A CALL, WE'LL HELP YOU INSTALL.  
PLEASE DO NOT RETURN PRODUCT TO STORE.  
Visit us on the WEB  
2 Speakers  
SPRING NUT  
For Information and Technical Assistance,  
Call Toll-Free in U.S.A. and Canada.  
The small hole of  
the spring nut is on  
this side of panel  
• Quick Release Terminals  
2. Slip the supplied spring nuts into  
place and align the holes.  
1-800-445-1797  
2 Grills  
8 Screws  
Limited Warranty  
8 Spring Nuts  
SPEAKER  
WIRE  
Spring Nut  
®
®
VIRTUAL REALITY SOUND LABS products are designed and manufactured to provide a high level of trouble-free performance.  
VIRTUAL REALITY SOUND LABS warrants, to the original purchaser, that its products are free from defects in material and  
Tools Needed To Install  
workmanship for 30 days from the date of original purchase. As part of our commitment to product excellence, VIRTUAL REAL-  
3. Screw the speaker into  
®
ITY SOUND LABS and/or its afliates routinely improve the designs, materials or production methods of its existing products.  
Because it is impractical to publicize all changes in every product, we reserve the right to make such changes without notice.  
CONDITIONS OF WARRANTY:  
If during the 30 day warranty period your new product is found to be defective, VIRTUAL REALITY SOUND LABS will repair  
such defect, or replace the product, without charge for parts or labor subject to the following conditions:  
1. All repairs must be performed by VIRTUAL REALITY SOUND LABS and/or its afliates in Eatontown, New Jersey.  
2. The equipment must not have been altered or been damaged through negligence, accident, or improper operation.  
3. The replacement of parts are exempted from this warranty when replacement is necessary due to normal wear and tear.  
4. All warranty claims must be accompanied by a copy of the sales receipt or bill of sale.  
5. Repair or replacement parts supplied by VIRTUAL REALITY SOUND LABS under this warranty are protected only for the  
unexpired portion of the original warranty.  
place with screws (provided).  
®
• Marker/Pen  
• Nail Set/Center Punch  
• Phillips Screwdriver  
4. Firmly attach the speaker  
grill cover.  
• Wire Cutter  
®
• Electric Drill  
with 1/16" bit  
®
Speaker wires with female disconnects on one  
end are recommended. When connecting the  
speaker wires to your speakers in a new instal-  
lation, you should follow the wiring instructions  
from your audio system’s manufacturer.  
Attach the quick disconnect connectors to the  
speaker terminals as shown. Maintain proper  
polarity by attaching the Positive Wire(+) to  
Positive Terminal(+) and the Negative Wire(-) to  
Negative Terminal(-).  
• Hammer  
• Safety Glasses  
• Electrical Tape  
6. In the case of car stereos, this warranty does not extend to the elimination of car static or motor noise; correction of antenna  
problems; costs incurred for the removal or reinstallation of the product; damage to tapes, speakers, accessories or car electrical  
systems.  
®
7. VIRTUAL REALITY SOUND LABS will not be responsible for any charge incurred for installation.  
Before You Install  
OWNER’S RESPONSIBILITIES:  
VIRTUAL REALITY SOUND LABS will make every effort to provide warranty service within a reasonable period of time.  
®
SHOULD YOU HAVE ANY QUESTIONS ABOUT SERVICE RECEIVED, OR IF YOU WOULD LIKE ASSISTANCE IN OBTAINING  
SERVICE, PLEASE CALL TOLL FREE 1-800-445-1797, 8:30am - 4:30pm EST.  
We understand that automotive audio equipment installations can be troublesome at  
times, even to the most experienced of installation technicians. If you are not con-  
dent working with electrical wiring, removing and reinstalling interior panels, carpet-  
ing, dashboards or other components of your vehicle, please call our TOLL-FREE help  
line 1-800-445-1797 and our in-house technical service team will answer your instal-  
lation questions.  
In order to provide you with the proper warranty service, we request that you adhere to the following procedure:  
1. Include a copy of your sales receipt or bill of sale with your unit when it is returned for warranty service.  
2. If it is necessary to return your product for service, please return it securely packed, preferably in the original shipping carton,  
and freight and insurance prepaid to the following address: VIRTUAL REALITY SOUND LABS, Service Department, 41 James  
Way, Eatontown, New Jersey 07724.  
3. Please include a detailed explanation of the problem you are having.  
4. If your product is found by VIRTUAL REALITY SOUND LABS to have a defect in material or workmanship, within the warranty  
For most systems the positive wire attaches to  
the positive speaker terminal and the negative  
wire attaches to the negative terminal.  
®
period, it will be repaired or replaced at no charge and returned to you prepaid. Where permitted by Iaw VIRTUAL REALITY  
®
SOUND LABS liability shall be limited to that set forth in this warranty. This warranty shall be the exclusive remedy of the  
purchaser.  
Before installing these speakers, check the vehicle’s owner’s manual for loca-  
tions of important vehicle components such as air bags, CO2 systems, fuel  
systems, & electrical systems installed in the vehicle. Accidental deployment  
of air bags may result in serious injury.  
®
VIRTUAL REALITY SOUND LABS makes no other warranty of any kind, expressed or implied; and all implied warranties, are  
®
®
hereby disclaimed by VIRTUAL REALITY SOUND LABS and excluded from this warranty, VIRTUAL REALITY SOUND LABS  
and/or its afliates, the manufacturer, distributor and seller shall not be liable for any injury, loss or damage, incidental or conse-  
quential, arising out of the use or intended use of the product.  
©2008 Intellectual Solutions Inc., All rights reserved. All designs, logos and images are the exclusive property of Intellectual Solutions Inc.  
and/or its afliates. U.S. and Foreign Patents Pending. 072408 Printed in China 00000  
 

Reebok Fitness Treadmill RBTL095070 User Guide
Renesas Network Card M306H7T3 RPD E User Guide
Rollei Air Compressor CWC200ST User Guide
Rollei Projector RVS1500 User Guide
Rubbermaid Outdoor Storage 1S85 User Guide
Samsung Digital Camera DV150F User Guide
Samsung Graphics Tablet SM T2105 User Guide
Samsung Satellite TV System DSB 4700F User Guide
Sears Portable Generator APG3004A User Guide
Seiko Group Network Card UB R02 User Guide