Roadmaster Work Light SBS2000H3 User Guide

Precautions  
Operation  
SBS2000H3  
BEFORE USING THE SBS2000H3 SPOTLIGHT READ THESE PRECAUTIONS  
MAIN LIGHT  
Dear Customer,  
Charge the battery completely before using the spotlight for the first time.  
Press the ON/OFF switch under the handle to turn the unit ON.  
CONGRATULATIONS. The SBS2000H3 High Output Spotlight when used as de-  
scribed, will give you years of dependable service in your home, car, truck, RV, or mini-  
van. We have taken exacting measures in quality control to ensure that your product  
arrives in top condition and will perform to your satisfaction.  
In the rare event that your SBS2000H3 High Output Spotlight is missing an item,  
contains a damaged part, does not perform as specified, requires warranty service, or  
you have an installation problem, DO NOT RETURN THIS PRODUCT TO THE STORE.  
PLEASE CALL OUR TOLL FREE NUMBER FROM THE U.S.A. AND CANADA 1-800-  
445-1797 and ask to speak with a member of our technical service team; or submit your  
questions to [email protected] and a member of our techni-  
cal service team will respond by email to your questions.  
LED LIGHT  
• Inspect the SBS2000H3 before each use.  
• Do not use the SBS2000H3 if it is broken, cracked, damaged or worn parts are ob-  
served, any spotlight that appears damaged in any way, or operates abnormally shall  
be removed from service immediately.  
• The SBS2000H3 spotlight is not a toy. Keep out of reach of children.  
• Do not use the SBS2000H3 spotlight for any purpose other than temporary lighting.  
• Do not look directly into the light beam when it is ON.  
• Do not leave the SBS2000H3 unattended when it is ON or recharging.  
• Do not use in overly wet conditions.  
• Do not use immerse the light in water or any other liquids, it is not waterproof.  
• Do not expose to fire or high temperatures, the battery may explode.  
• Do not operate the spotlight facing down on a surface especially in the proximity of  
flammable objects.  
The side LED lamp is controlled by the push button switch on the lens of the LED light.  
Press the switch once to turn the LED light ON, press it again to turn it OFF.  
Press the switch again to turn on the LED light in flash mode, Press it again to turn it  
OFF.  
ADJUSTABLE BASE  
The SBS2000H3 has an adjustable multi-position base.  
Our in-house technical service team will expedite delivery of your part, advise you on  
installation, or help troubleshoot a problem with you. If your product needs warranty  
service, our technical service team representative will help you obtain the fastest rem-  
edy possible under the warranty.  
ADJUSTABLE STRAP  
The strap on the spotlight can be adjusted by sliding the adjustable buckle.  
• Charging produces hydrogen gas that may explode when exposed to fire. Do not  
charge use near flame or spark.  
• Do not aim the spotlight in peoples eyes as it may cause damage or blindness  
• You must use the AC adaptor supplied with the SBS2000H3. Do not use any other  
adaptor to charge the battery.  
• Before charging move all switches to the OFF position.  
• Do not completely discharge battery before recharging as this will decrease the  
battery’s life.  
• Charge the battery completely before using the SBS2000H3 for the first time.  
• Do not store the SBS2000H3 spotlight for extended periods of time. Charge every  
three months during storage.  
Specifications  
GIVE US A CALL, WE'LL HELP YOU INSTALL.  
PLEASE DO NOT RETURN PRODUCT TO STORE.  
Visit us on the WEB  
Bulb:................................................................................12 Volts @ 55 Watts H3 Halogen  
Battery:.......................................................................................12V DC @ 4.5 Amp Hours  
Case: ....................................................................................................... High impact ABS  
Internal Fuse:.........................................................................................................10 Amps  
On / Off Switch: ....................................................... Rocker Switch on Underside Handle  
AC Wall Charger:.................................................................................... 15V DC @ 600 ma  
Multi-color LED Panel:..............................................................................Charging status.  
Dual Purpose LED Lamp: ....................... Area or Flashing White Light. Three Position Switch.  
Carry Strap..................................................................................... Adjustable/Removable  
Adjustable Base............................................................................................Multi-Position  
For Information and Technical Assistance,  
Call Toll-Free in U.S.A. and Canada.  
1-800-445-1797  
• Do not charge the battery for an extended period of time. Overcharging will greatly  
shorten battery life.  
• Overcharging may result in battery overheating and leakage.  
• Avoid charging at temperatures below 39/ 4.  
Change the Battery  
Important  
To maximize battery life, maintain battery charge before storage. Do  
not charge for more than 9 hours. Never overcharge the battery.  
Do not attempt to disassemble battery or remove any parts from the  
battery or terminals.  
• The DC adaptor’s plug becomes very warm when in use. Use caution when unplug-  
ging from receptacle.  
• Recharging time is dependent upon how discharged the battery is, never charge for  
more than 9 hours.  
Adjustable Carry Strap  
Do not attempt to burn or incinerate.  
• Do not charge longer than the times stated.  
When disposing of the SBS2000H3 do so in accordance with local regulations pertain-  
ing to disposal of lead acid batteries, plastics and glass. Regulations may vary.  
Contact your local Solid Waste Authority for recycling information.  
AC CHARGING ADAPTOR  
Do not leave the SBS2000H3 unattended when charging the battery.  
Fully charge battery after each use.  
1. Remove the five screws from the rear panel of the spotlight.  
Screws  
Fully charge battery every 3 months to maintain battery life.  
Allowing discharged batteries to sit for several months will reduce lifetime.  
2. Remove the rear panel from the body of the spot light.  
ON/OFF Switch  
3. Disconnect the red and black wires from the old battery, and re-  
move the battery from the body of the spotlight.  
1. Insert the DC plug into the jack  
on the side of the SBS2000H3,  
then plug the AC adaptor into a  
110V AC outlet.  
4. Replace the battery with a battery that has same voltage and am-  
perage rating as the original. (12V DC @ 4.5 Amp hours)  
Charging Status Panel  
2. The Red LED will light to  
indicate the battery is charging.  
5. Reconnect the Red Wire to the Positive (+) battery terminal and the  
Black Wire to the Negative (-) battery terminal.  
3. The both Green LEDs will  
light when the battery is fully  
charged.  
6. Reinstall the battery to its original position inside the body of the spotlight.  
7. Reinstall the rear cover and tighten the five screws. Do not overtighten the screws.  
Adjustable Multi-Position Stand  
Multi-function LED Light  
Do not charge for more than 9 hours.  
 

Pyramid Car Audio Home Theater System ZPA100 User Guide
Radio Shack Baby Toy 60 2626 User Guide
Raypak Electric Heater E 4 User Guide
Renesas Network Card HS1664ECH61H User Guide
Rosewill Flat Panel Television R908TV User Guide
Rotel Stereo System RB 06 User Guide
Samsung Flat Panel Television LE26A41B User Guide
Samsung Microwave Oven DE68 01931A 01 User Guide
Samsung MP3 Player DVD V3650 User Guide
Sangean Electronics Clock Radio RCR 1 User Guide