Sanyo Cell Phone S750i User Guide

Preface

Useful features

Thank you for purchasing the S750i colour LCD mobile phone. To obtain the best

results from your new phone we advise you to use only Sanyo approved accesso-

ries. Please read this guide before attempting to use the phone. In particular, be

sure to read “Safety Precautions” on pages 187 to 195. Failure to comply with the

instructions in the guide may cause serious harm or violate local laws. It is

recommended that you keep the guide in a safe place for future reference.

This sliding type phone with large TFT colour LCD display enables you to:

• Make and receive video calls.

• Take and send video images or colour, sepia or even black and white

photos using either of the two built-in smart cameras (1.3 megapixel rear

camera and 310 kilopixel front camera).

• Send and receive messages with video images, photos, or sound attached using

Picture Messages.

• Send and receive long messages with attached files using email.

• Use as a video player or an audio player.

• Take video images and photos in the dark using the built-in LED flash and

spotlight.

• Use a wide variety of data formats.

• Display a World Clock.

• Access Orange World or other web sites.

• Enjoy Java™ games.

• Transmit data via Bluetooth^®, Infrared, or USB.

• Store data on a SD Memory Card.

Declaration of conformity

We, SANYO Electric Co., Ltd. of 1-1 Sanyo-cho, Daito City, Osaka Japan, declare

under our sole responsibility that the product S750i complies with the requirements

of Article 3.1 (a), 3.1 (b) and 3.2 of the R&TTE 1999/5/EC Directive, which is based

on the following standards, if used for its intended use.

Applied standards: EN 50360, EN 50361, EN 60950, EN 301 489-1, EN 301 489-

7, EN 301 489-17, EN 301 489-24, EN 301 511, EN 301 908-1, EN 301 908-2,

EN 300 328-2

Icons on your display

All signals are off, except the

alarm and timer

Antenna

The more bars shown, the

stronger the signal.

The alarm clock has been set

and is on

Voice and data services

available

Infrared communication is in

progress

Voice and enhanced 3G data

services available

Basic

Operations

Indicates Bluetooth^®mode is

on (Visibility is set to Always

Visible or Visible for 3Min.)

Indicates Bluetooth^®mode is

on (Visibility is set to Hidden)

Indicates Bluetooth^®transmis-

sion in progress

Battery level

Recharge your battery when the

charge indicator falls below the

second bar level.

Voice call in progress

Video call in progress

Indicates you are in roaming

service area.

A Java™ application is running

An SD card is inserted (write

protect lock is off).

All calls are set to be diverted

You have received a text/

email/picture message

You have received an Answer

Phone Message

An SD card is inserted (write

protect lock is on).

Indicates you have an unread

WAP push message.

Basic Operations

Making a call by pressing a numeric

key once (Speed dial)

Press t or O to answer.

• You can also set the phone to

answer calls by sliding the phone

open. (See p. 121.)

• To divert your calls to another

Making a voice call or video

call

number, press [Divert] when an

incoming call is detected. See p.

128 for how to set specify the

destination number.

To make a call, just press a single-digit

corresponding to the registration

number (Quick Dial No.) in the Address

Book.

Slide open the phone and enter the

phone number you want to call (up

to 40 digits) using the numeric

keys.

Press y to end the call.

Note: To set a sound or photo for the

Operations during a call

specific caller, see p. 55.

• To erase a digit, use B. Press

and hold B to erase all digits.

• Press l after entering a number

and a cursor appears. Use l / r

to move the cursor where

required.

Enter the contact number

(corresponding to the registered

number between 2-9) in the

Address Book.

You can adjust the speaker volume,

change the sensitivity of the micro-

phone, or take a note during a call.

You may also reject the call even after

you answer it if you do not want to talk

to the person.

Operations just before you

answer

Press t to make a voice call.

Before answering the phone, you can

decrease or mute the ringer volume,

or disconnect the call when the phone

rings.

Note: If you press v instead of t key in

step 2, you can make a video call.

(See p. 28.)

Press t to make a voice call or

press v to make a video call.

Press y to end the call.

• To adjust the volume, press u / d while

on the phone.

• To access the Main menu, press O while

on the phone.

Note: You can make a call from Contacts

(see p. 61.) or from a Call History (see

p. 11.).

• To adjust the ringer volume, press u

/ d when the phone rings. To mute

the ringer, press B.

• To disconnect the incoming call if

you do not want to answer it, press

Receiving a call

The ringer sounds, the backlight

flashes, and the message

“Incoming Call” flashes on the

display.

Basic Operations

• Press [Options] and select Whisper

and press O. To cancel the Whisper

Mode, press [Cancel].

Putting the call on hold (Hold)

• Press [Options], select Echo Party

Voice and press O.

Call History

This function enables you to hold the

call until you are ready to resume

talking.

The following instructions explain how

to redial or return calls using the Call

History.

Note: An empty black screen is transmitted

when you use this function during a

video call.

Notes: • Whisper Mode is automatically

cancelled after a call.

• Press [Hold] to put the call on hold. To

resume the call, press [Un-hold] (or t or

O).

• This function is not available for

video calls or when connecting to

a headset.

Opening the dialled/received/

missed call history

Entering a phone number in Call

Note or Address Book

Receiving a second call

• In Standby mode, press t. The

dialled call history appears. You can

jump to the missed call history by

pressing r. If you press l from the

dialled call history, you can go to the

received call history.

Muting your voice

You can directly enter a phone number

and store it in Call Note or Address

Book during a call.

In order to utilise this function, you

need to first go to the ‘Call Waiting’

settings menu and switch Voice to On

(see p. 131)

This function enables you to speak to

another person close by while listening

in on a phone conversation at the

same time.

Directly enter a number using the

numeric keys.

Press O, select Address Book or

Call Note, and press O.

• t: Press to put the first caller on standby

and speak with the second caller.

• O: Press to release the first caller’s call

and speak with the second caller.

• Press [Options], select Mute and

press O. To release mute, press

[Options] and select Unmute.

Redialling using the dialled call

history

Notes: • Up to five numbers can be stored

in Call Note.

• In Standby mode, press t, select

the number you want to redial and

press t to make a voice call. To

redial the last outgoing number,

press and hold t from the Standby

mode.

Whisper Mode

Anti-Nuisance Function

• For details about storing numbers

in the Address Book, see p. 54.

• For retrieving the stored numbers,

see p. 152.

You can raise the microphone

sensitivity to enable speaking in a soft

voice and still be heard.

This function enables you to reject the

incoming call by sending the caller’s

voice back.

Basic Operations

Calling back using the received call

history

Call History options

Setting your own security

code

Hands-free function

• Press [Options] in the Call History

display, select the option you want

to perform and press O. Note that

menu options vary according to the

type of Call History.

This function raises the sensitivity of

the microphone and the volume of the

speaker so that you can talk hands-

free while the phone is on a flat stable

surface. When using a hands-free

device, make sure it is within 20-30

cm of the phone.

In Standby mode, press t and then

press l.

See p. 126.

Select the number and press t to

make a voice call.

Profiles

Calling back using the missed call

history

When in public areas set up your

profiles so you can receive incoming

calls or messages without disturbing

others with loud ringer sounds. This

phone has seven types of Profiles, and

the one called Normal is selected at

the time of purchase. You can easily

mute the ringer sound or change the

Key Tone volume to suit your

Displaying the last call time/

total call time

In Standby mode, press t and then

press r.

Note: Your voice may not be clearly heard if

there is background noise and when

you are speaking some sound may

be clipped.

You can check the last call time or

total call time.

Select the number and press t to

make a voice call.

In Standby mode, press [Menu] to

go to the main menu.

Activating Hands-free function

Tip: If there are any missed calls, an icon

appears next to , in Standby

Press [Options] on the phone while

talking on the phone, select Hands-

free ON and press O.

• To deactivate hands-free, repeat

step 1 and select Hands-free

OFF.

Highlight

and press O, and

mode. Select

using d and press O

surroundings. For example, “Loud”

and “Outdoor” are useful when in

noisy surroundings.

and you can select a missed call

history.

select Call Time and press O.

Select Total Call Time or Call Time

and press O.

• To activate or deactivate the Profile,

press and hold B.

Note: The times are displayed in hours,

minutes, and seconds.

• To select the Profile type, see p.

108.

Basic Operations

Note: Phone must be closed to activate the

lock. To prevent unauthorised use,

see. P 124 on how to configure dial

lock.

Using a wired hands free headset

while Hands-free is activated

Calling a number with pauses

Using the Penlight

Example: If the number “P1234P5555”

is to be added after the phone

number.

You can use the LED as a penlight if

you need to illuminate an object in the

dark.

You can perform the functions below

by pressing and holding the earphone

switch.

Make the call.

Press . The first series of numbers

(1234) is sent.

Press . The second series of

Pause Dialling

• Receives a call when an incoming

call is detected.

• Makes a call in the standby mode.

• Cancels a call in the middle of

making a call.

• Ends a call.

• Resumes a call after putting the

other party on hold.

• Resumes a call with the second

party after putting him or her on hold

and talking with the third party or

switches between the second party

and the third party to talk with.

Switching ON the penlight

When using a push-button phone

service for a purpose such as

checking your bank account balance,

you need to send a series of numbers

with pauses after placing the call. The

S750i enables you to enter the whole

series of numbers first and then send

each set of numbers just by pressing

Slide the phone open.

In Standby mode, press and hold

numbers (5555) is sent.

Changing the display

language

Locking or Unlocking the

Phone

In Standby mode, press [Menu],

To prevent accidentally pressing

keys/buttons

highlight

and press O, then

select Phone Settings and press

Select Language and press O, then

select Display Language and press

Select the language you want to use

from English, Français, Deutsch, and

Italiano.

Entering a phone number including

pauses

From your Standby display, press

and hold [Menu].

Press n twice after entering each set

of numbers. The character “P” is

inserted.

Note: Operation of the earphone switch

To unlock, press and hold [Unlock].

depends on the type of headset.

Basic Operations

Changing the font size

Changing between upper case and

lower case

Text entry

First Name

• Press [Options] in text input mode,

select Character Size and press O,

select the desired font size and

press O.

This phone uses three modes for text

and character input, Standard, T9

(Predictive), and Numeric. The

Standard and T9 modes are used for

entering text, and the Numeric mode

is used for entering numbers. The

language indicator at the bottom left of

the display shows the language you

are currently using, except in the

numeric input mode. For key

• Press ; in either T9 mode or

Standard text input mode. The case

status indicator at the left bottom of

Standard text input

mode

0/32

the display, (

, or

)

Options

shows the characters you are

currently using.

Changing the input mode

Press and hold

; .

• Press and hold ;. In T9 mode,

appears at the centre bottom of the

display. In the numeric input mode,

appears.

Makes all the letters lower-case.

Capitalises the first letter of each

sentence and makes the rest

lower-case. If a sentence ends

with a period (.) followed by a

space, the phone automatically

capitalises the first letter of the

next sentence.

First Name

assignment, see the table on p. 23.

Tip: You can also change the input mode

by pressing [Options] and selecting

Input Method or Numeric Input in

text input mode.

0/32

Changing the input language

T9 input mode

Options

It is possible to enter text in another

language without changing the current

language mode setting default. E.g., to

enter a French word in English mode.

Press [Options] in the text input mode,

select Input Language, select the

desired language, and then press O.

Press and hold

; .

Capitalises all the letters.

First Name

Note: If

is not shown, but either

, or

appears, it indicates that

the Standard text input mode is used.

Numeric input mode

0/32

Options

Basic Operations

Entering text in Standard text input

mode

For example:

(Change the input mode to Standard

input.)

• To enter the letter “o,” press 6 6

• To enter the word “dog,” press 3,

666, 4.

• To enter the word “cat,” press

222, wait for a second,

press 2, and then press 8.

For example:

(Change the input mode to T9.)

Adding a word to the T9 dictionary

If you cannot find the right word in T9

mode use the following procedures to

enter the word. The word is added to

the T9 dictionary at the same time so

that you can find it the next time you

perform the same keystrokes.

•

To enter the word “Home”, press 4,

6, 6, 3. If your desired word

does not appear, press d or 0 to

display the word selection window.

Use the navigation keys to select

“home,” and press O.

You can enter a letter in Standard text

input mode by pressing the numeric key

on which the letter is printed. To enter

the first letter indicated on the numeric

key, press the key once. To enter the

second letter, press the key twice, and

so on. If you want to enter letters that are

on the same numeric key, wait for a

second until the bar cursor appears

before entering the next letter so that

your phone can process the previous

letter.

After pressing d to display the word

selection window in T9 mode, press

[Spell]. The Add Word window

appears and the input mode is

changed to Standard text input

mode.

Notes: • To accept the word as it is before

the word selection window

appears, the most common way

is to enter a space by pressing

n .

Entering text in T9 mode

The S750i supports a predictive text

input (T9) system that automatically

searches for and predicts the best

appropriate word by frequency of use.

You can thereby enter words much

faster and easier. When you are in T9

mode, just press each numeric key

once that contains the letters you want

to form a word. T9 then analyses your

key presses and attempts to complete

the word.

• If you do not see the right word

after pressing d from the T9 word

selection window, press the right

Soft key [Spell] to add the word to

the T9 dictionary. See below for

details.

Enter the word following the

Standard text input procedure.

Press [Insert]. The word is entered

and also stored in the T9 dictionary.

Basic Operations

Tip: It is also possible to add a word to the

T9 dictionary after the word is entered

using the Standard input mode.

Tip: From the window displaying a list of

symbols, press n to display

• Press and hold ; repeatedly until

Other Key Functions

the numeric mode indicator,

appears. To enter numbers in

Numeric mode, just press the

corresponding numeric key(s).

Entering a space

emoticons. Emoticons are categorized

and listed in another window. Press l

/ r or [Next Pg.] to switch to a

Placing the cursor at the beginning or

end of the word you want to add to

the T9 dictionary, press [Sel. Text],

highlight the word using the navigation

keys, and press [OK]. Select Save to

Dictionary and press O.

• In Standard text input or T9 mode,

press n.

different emoticon category.

• In Standard text input mode, press

the desired numeric key repeatedly

until it appears.

• You can also enter numbers by

pressing and holding the numeric

keys both in Standard text input or

in T9 modes.

Starting a new line

Deleting letters

• In Standard text input or T9 mode,

press n twice.

• Press B to backspace and delete

a single letter.

• Press and hold B to backspace

and delete an entire text field.

Re-selecting the word in T9 mode

Entering punctuation

You can re-select the accepted word.

Move the cursor backward and the

word becomes underlined. Press d

while underlined and the word

• In Standard text input mode, press

1 repeatedly to scroll through

commonly used punctuation:

. , - ? ! ‘ @ : /_ 1

Tip: You have another option to delete

letters. Place the cursor at the point to

or from where you wish to delete

letters. Then press [Options], select

Delete and press O, and then select

Delete before cursor, Delete after

cursor or Delete All.

Entering symbols

selection window re-appears.

Press and hold n in text input

mode. The symbol selection

window appears.

Entering an asterisk (*), or a pound

sign (#)

Entering numbers

The following indicates three different

methods of number entry.

Select the symbol and press O to

accept it and return to the

message entry field. Or you can

press [Continue] to enter the

selected symbol and retain the

symbol selection window to enter

another symbol.

• Change to Numeric mode, and

press the corresponding key on the

keypad.

Entering the plus (+) sign for interna-

tional calls

• Press and hold 0.

Basic Operations

Copying and Cutting

Select the data and press O. The

Key assignment on numeric keys (In standard input)

selected data is pasted.

Key

English

French

German

Italian

Copying or cutting a word

–

. , - ? ! ’ @ : / _ 1

A B C 2

a b c 2

. , - ? ! ’ @ : / _ 1

A B C Ç À Â Á Ä 2

a b c ç à â á ä 2

D E F É È Ê Ë 3

d e f é è ê ë 3

G H I Î Ï Í 4

. , - ? ! ’ @ : / _ 1

A B C Ä Á À 2

a b c ä á à 2

D E F É È 3

d e f é è 3

G H I 4

. , - ? ! ’ @ : / _ 1

A B C À 2

a b c à 2

D E F È É 3

d e f è é 3

G H I Ì 4

Place the cursor at where you want

to start copying or cutting from,

and press [Sel.Text].

Upper case

Lower case

Upper case

Lower case

Upper case

Lower case

Upper case

Lower case

Upper case

Lower case

Upper case

Lower case

Upper case

Lower case

Upper case

Lower case

Quick press

Press and hold

Undo feature

Press [Undo] after you have performed

a pasting or deleting operation to

cancel the operation.

D E F 3

d e f 3

Highlight the range you want to

copy or cut using the navigation

keys, and press [OK]. A menu

selection window appears.

G H I 4

g h i 4

g h i î ï í 4

g h i 4

g h i ì 4

J K L 5

j k l 5

Select Copy or Cut and press O.

The selected data is saved in the

Paste List, which is accessible from

the Options menu.

M N O 6

m n o 6

P Q R S 7

p q r s 7

T U V 8

t u v 8

M N O Ô Ó Ö Ñ 6

m n o ô ó ö ñ 6

P Q R S 7

M N O Ö 6

m n o ö 6

P Q R S 7

p q r s ß 7

T U V Ü 8

t u v ü 8

M N O Ò 6

m n o ò 6

P Q R S 7

p q r s 7

p q r s ß 7

T U V Ù Û Ú Ü 8

t u v ù û ú ü 8

W X Y Z 9

T U V Ù 8

t u v ù 8

Pasting a word

After copying or cutting a word or

sentence, place the cursor to

where you want to paste the

copied/cut part.

W X Y Z 9

w x y z 9

W X Y Z 9

w x y z 9

W X Y Z 9

w x y z 9

0 (Note 1)

Switch between

upper/lower case

Switch between

upper/lower case

Switch between

upper/lower case

Switch between

upper/lower case

Press [Options], select Paste Text

and press O. The data you just

copied or cut appears at the top of

the Paste Text list.

Quick press

;

Switch input mode

Space, New line

Switch input mode

Space, New line

Switch input mode

Space, New line

Switch input mode

Space, New line

Press and hold

Quick press

Symbol, Abbreviation Symbol, Abbreviation Symbol, Abbreviation Symbol, Abbreviation

Press and hold

Note 1: When using T9 mode, you can press 0 key while the word is being input (before its accepted) and

when you move the cursor back over an accepted word to display another list of selectable words.

Video Call

You can view Video images of the

other caller and yourself during a call.

The other callers phone must be video

call compatible.

Image format

Making a video call

The display resolution is set to QCIF

format during a video call by default.

Slide open the phone and enter the

phone number you want to call (up

to 40 digits) using the numeric

keys.

Video call icon indicators

Display during a

video call

3G area

Within 3G area

During a video call

High speed

Format

QCIF

Screen size (Large / Small)

(L) 176 x 144 dots

(S) 78 x 64 dots (including frame)

Video call status

Press v. When the other party

answers the call, images of the

other party and yourself appear on

the display.

Image quality and

transmission speed

Normal

High quality

• You may not receive an image of

the other party if his or her phone

is not correctly set for video calls

even though their phone

99.59.59

Your own image is being sent

Alternative image is being sent

OFF

Hold

Options

Sending image status

supports them.

Voice ON

Voice status

• If the other party does not have a

video call function, the video call

can automatically or manually be

switched to a voice call. You can

set this beforehand by selecting

Auto or Manual in Reconnection

Method Settings. (See p. 134.)

Voice OFF

Front camera lens

Rear camera lens

Normal magnification

Twice magnification

Camera used

Zooming

Hands-free function is activated. The icon

disappears when the function is not used.

Press

to end the call.

Hands-free function

Anti-nuisance

function

Anti-nuisance function is activated. The icon

disappears when the function is not used

Video Call

Tip: You can make a call from Contacts

(See p. 61.) or from a Call History (See

below.). When using Contacts or a Call

History, you can call with the phone

closed.

Making a call pressing a numeric

key once (Speed dial)

Receiving a video call

Operations just before you

answer the video call

The ringer sounds, and the

backlight flashes.

Press t or O to answer the call.

• It may take sometime for images

of the other party and yourself to

appear on the display.

To make a video call, just press a

single-digit corresponding to the

registration number (Quick Dial No.) in

the Address Book.

The same operations are available

before you answer the video call as in

the voice call.

Redialling or calling back using the

Call History

• To adjust the ringer volume, press u

/ d.

• To mute the ringer, press B.

• To disconnect the incoming call if

you do not want to answer it, press

y .

• To divert your calls to another

number, press [Divert]. See p. 128

for how to specify the destination

number.

Enter the contact number (corre-

sponding to the registered number

between 2-9) in the Address Book.

Press v to make a video call.

Redialling using the dialled call history

• Using the Hands-free function

(See p. 13, 33 and 133), place

the handset close by on a flat

stable surface to hear the caller’s

voice. Hands-free automatically

raises both the sensitivity of the

microphone and the volume of

the speaker.

•

In Standby mode press

the phone number or name and

press or

t, select

Note: If you press t instead of v key in

step 2, you can make a voice call.

(See p. 8.)

Calling back using the received call

history

• In Standby mode, press t, press

l, select a phone number or name

Press y to end the call.

and press v or

Tip: For details about Call History, see p.

11. The icons in the Call History

indicate:

Video Call

Missed Call

Video Call

Muting your voice

High Speed:

Suitable for fast

moving images.

For conventional use.

Best suited for non-

moving images.

Switching the Front/Rear camera

Operations during a video

call

This function deactivates the micro-

phone to mute your voice. This

enables you to speak with another

person close by and still listen in on

the conversation at the same time.

The camera can be switched from

front to rear or vice versa.

Normal:

High Quality:

During a video call, you can adjust

brightness, white balance, and image

quality. You can zoom and switch the

sent image between your own-image

and the available image as well as

choose and send video images stored

in the Media Album.

Press [Options], select Switch

Camera and press O.

• To reverse the setting, repeat

step 1.

Cancelling image transmission

• Press [Options], select Mute and

press O. To release mute, press

[Options] again and select Unmute.

Although, by default, your image is

sent in a video call, you have the

choice not to send your own-image.

The alternate image set at Alternate

Video is sent instead. See p. 134 for

setting the Alternate Image.

Note: You cannot use this function when

the phone is closed.

Switching the size and position of

the images

Indicating image priority

Zooming

You can adjust the image quality as

desired for display or when sending an

image.

You can zoom in or out on the image

you are sending.

The size and position of your own-

image can be switched to those of the

other party. By default, the other

party’s image is displayed larger than

yours and placed above yours.

Press v while your image is being

sent.

Press [Options], select Settings

and press O, then select Zoom

and press O.

Select Enlarge or Normal and

press O.

• To return to sending your own-

image, press v again.

Press [Options], select Settings

and press O, then select Image

Priority and press O.

Select from High Speed, Normal

or High Quality and press O.

Or press [Options], select Turn

• Press [Options], select Swap

Images and press O.

Camera OFF / Turn Camera ON and

press O to cancel image transmission

or to resume image transmission.

Video Call

Note: It is possible that the flicker may not

be removed completely even after

you changed this setting. However,

this is not considered to be a

Adjusting the brightness or white

balance

Press [YES].

• Press [Options], select Hands-free

ON and press O. To deactivate

hands-free, press [Options] again

and select Hands-free OFF.

• During the sending of video

image data you cannot talk on

the phone.

You can adjust the brightness or white

balance of the image you are sending.

problem with the phone.

Using Anti-Nuisance Function

Putting the call on hold (Hold)

Press [Options], select Settings

and press O, then select Flicker-

free and press O.

Select 50 Hz or 60 Hz and press

Press [Options], select Settings

and press O, then select Bright-

ness or White Balance and press

Adjust the brightness using u / d,

or adjust the white balance by

selecting Auto, Sunny, Cloudy,

Electric Light, Fluorescent 1, or

Fluorescent 2 and pressing O.

You can reject an incoming call by

sending the caller’s voice back with a

blank image.

This function turns OFF the micro-

phone and sends a recorded video

message to the caller until you are

ready to resume talking.

•

Press [Options], select Echo Party

Voice and press O. Press [Cancel]

to release the function and return

to talking.

Sending a video stored in the Media

Album

• Press [Hold]. Images of both the

other party and yourself disappear.

The recorded video message is sent

to the caller.

You can retrieve a video stored in the

phone and send it to the other party

during a video call. See p. 81 for

details about the Media Album.

Reducing flicker

Activating Hands-free

Note: After putting the call on hold, press

Occasionally the image may flicker due

to less than optimal local frequency.

You can use the “Flicker-free” function

to reduce this problem. Flicker is likely

to occur when you move between

areas using different frequencies (50

hertz or 60 hertz).

This function raises the sensitivity of

the microphone and increases the

volume of the speaker temporarily so

that you can talk hands-free with the

phone on flat stable surface. The

setting changed here returns to the

previous one when you finish the video

call. (See also p. 133)

[Un-hold] to resume talking.

Press [Options], select Send Video

Clip and press O.

Select a video in the Media Album

and press O.

Using the Still

and Video

Camera

Using the Still and Video Camera

You can take still colour photos or

videos with the built-in front or rear

camera. Sending photos or videos via

Picture Message or Email is also

available. You can use both the phone

or removable memory (SD Card) to

save your favourites. For how to use a

SD Card, see p. 91.

Parts and names

Starting the still camera

Continuous:

Lighting Effects:

White Balance:

Cloudy

A) Front camera

Use the front camera lens to display

an image of yourself.

The image on the display appears

mirror-reversed.

• In Standby mode, press the left Soft

key [Camera]. (Or press [Menu],

Sunny

highlight

and press O.)

Electric Light

Fluorescent light 1

(white colour)

Fluorescent light 2

(daylight colour)

Still camera icons

Zoom:

B) Rear camera

Use the rear camera lens to display

images in front of you.

Zoom in

Brightness:

Zoom out

Note: Set the clock before using any

camera functions. Unless it is set, the

camera will not work. See p. 112 for

setting the clock.

Scene:

Night scene

light shielding

Storage Device:

Handset

Quality:

C) Flash/spotlight

SD Card

Fine Normal

indicates you can press 0 to

change the size to the following.

Small size

Superfine

Image Size:

Large size

Orientation:

(See the note below.)

Shutter:

(Press O.)

Note: When using VGA & SXGA sizes, turn

the phone on its side with the

headset connector facing up when

taking a photo to display using

normal orientation after the photo is

taken.

Note: Not all icons are displayed at the

same time. If no operation is

• When the phone is closed, the rear

camera is not available.

performed for about 2 minutes, the

phone returns to the Standby mode.

Using the Still and Video Camera

Starting the video camera

Zoom:

Zoom in

Brightness:

Storage Device:

Handset

Press O to take a photo. A preview

is displayed before saving.

• To retake another and disregard

the current photo, press B and

press [Yes] corresponding to the

confirmation dialogue. The

display returns to the viewfinder

in the camera mode.

Press O to save the photo or wait

for a while and the photo is

automatically saved.

• To view the photo you have

saved, go to the Picture Album

from [Options].

Still camera

Zoom out

• In Standby mode, press the left soft

key twice ([Camera] → [Video]). (Or

press [Menu], highlight

press O, then press [Video] )

Besides taking and sending a single

photo, you can take continuous-frame

photos, select the best one and send

it.

and

SD Card

Quality:

Superfine

Fine

Normal

Tip: You can switch between the still

camera and the video camera mode

by pressing the left Soft key while in

the video camera or still camera mode.

Image Size:

Lighting Effects:

White Balance:

Cloudy

Taking a photo

Slide open the phone and press

the left Soft key [Camera] to access

the still camera mode.

Sunny

Video camera icons

Electric Light

Fluorescent light 1

(white colour)

Fluorescent light 2

(daylight colour)

Aim at a subject using the display

as a viewfinder. If you press

[Camera] when the phone is

closed, only the front camera is

usable.

•

The photo may not be stored

depending on the size of the data

and the remaining memory. It is

recommended that you delete any

unneeded data in the Picture

Album before taking a photo.

Recording voice:

Camera

Options

indicates you can press 0 to

change the size to the following.

Small size:

Large size:

PAUSE:

(Press O.)

END:

(Press the left soft key.)

Using the Still and Video Camera

Tip: If you press and hold O to save a

photo in step 4 above, the folder

selection window appears, and you

can select the Picture folder or another

folder if you have created one. (See p.

82.)

Sending a photo via Bluetooth or

Infrared

Taking Continuous-frame photos (for

still camera only)

To select and save a photo from the

continuous-frame taken photos

If you want to only select a specific

photo to save, select the desired

thumbnail photo after taking the

continuous frame photos and press O

before pressing [Save All]. The

selected photo is displayed enlarged.

Use l / r (or n or ;) from this

display to view the other continuous

frame photos taken. Press O again to

save the displayed photo.

Before using this function, be sure to

activate reception mode on the

receiving device. (When you are using

an S750i as the other receiving device,

see pp. 172 when using Bluetooth and

181 when using infrared to receive

data.)

This feature is not available for image

sizes VGA and SXGA. The number of

shots can be selected from 16 or 9.

For 9 shots, there are 3 levels of

Sending a photo attached to a

Picture Message or an Email before

saving it

continuous-frame shooting speeds.

Press [Options] while focused on a

subject, select Continuous and

press O.

Refer to “Cautions” for infrared

transmission (See p. 179.)

As soon as you have taken a photo

you can attach it to a Picture Message

or an Email.

Select the number of shot

Press [Send] after taking the photo.

Bluetooth transmission: Select

Send via Bluetooth →

Press O → Press

combinations and continuous-

frame shooting speeds from 16

Shots, 9 Shots (Fast), 9 Shots

(Mid), and 9 Shots (Slow). The

display changes to a viewfinder.

Press O to take the photos. After

all the photos are processed, they

are displayed in a thumbnail format.

Press [Save All] to save.

Note: Soft key indicators are removed from

the display if that photo is saved so

that you can tell which photos are

already saved.

Press [Send] after taking the photo.

Select Attach to Message and

press O.

[Search] → Follow the

procedures from step 7

on page 169.

Select the message type and press

O. The display turns into a

message creation screen.

To save all the photos in one file

You can save continuous-frame taken

photos in thumbnail form in one file.

This enables you to view all the

Infrared transmission: Select Send

via Infrared → Press O

Select Save and press O on the

receiving device.

continuous-frame photos at once.

Using the Still and Video Camera

• Press [Options], after taking the

photos and select Save as One

image, then press [Yes].

• The video may not be stored

Sending a video attached to a

Picture Message or an Email before

saving it

Refer to the procedures from step

2 “Sending a photo via Bluetooth

or Infrared” on p. 40.

depending on the size of the data

and the remaining memory. It is

recommended that you delete

any unneeded data in the Video

Album before recording.

As soon as you finish shooting a video

you can attach it to a Picture Message

or an Email.

Note: The pairing device’s Infrared

reception mode must be turned on

before sending. (See p. 181.)

Video camera

Note: You can change the video recording

Recording a video

Press [Send] after shooting the

video.

Select Attach to Message and

press O.

Select the message type and press

O. The display turns into a

message creation screen.

default time. See p. 47 for details.

Saving the video in the Media

Album

Slide open the phone and press

the left Soft key twice ([Camera] →

[Video]).

Tip: If you press and hold O to save a

video in step 4 above, the folder

selection window appears, and you

can select the Video List folder or

another folder if you have created one.

(See p. 82.)

Press and hold O just after

shooting a video.

Aim at a subject using the display

as a viewfinder.

Press O to start recording.

• To stop the video camera, press

Select the Video List folder or

another folder if you have created

one and press O.

Sending a video via Bluetooth or

Infrared

Taking photos while recording a

video

• You can press O while shooting

to pause the recording. Press O

again to continue recording.

Press O to save the video or wait

for a while and the video is

automatically saved.

Operations while taking a

photo or recording a video

As soon as you finish shooting a video

you can transmit it via Bluetooth or

Infrared.

While shooting a video, you can

capture a still image just by pressing

[Grab]. It is automatically saved in the

Picture folder after you have saved the

video. Up to 9 still images can be

captured from a video recording.

You can adjust brightness, adjust zoom

or white balance, adjust the photo or

video data quality, and other features

using the keys indicated in the table

below.

Press [Send] after pressing

stop the video camera.

• To view the video you have

saved, go to the Video Album

from [Options].

Using the Still and Video Camera

Shortcut keys for adjusting zooming or brightness and other items

Taking a self portrait using the front

camera lens

Press [Options] while monitoring a

subject, select Camera Settings

and press O, select Lighting

Effects and press O.

Select a flash function (for still

camera only) from Auto Flash and

Flash ON, or select the illumination

duration from Light (5 Min), Light

(3 Min), and Light (1 Min). If you

do not want any lighting effects,

select OFF.

Key (While

monitoring)

Function

Press [Options] while monitoring a

subject, select Switch Camera

and press O.

Brightness

(11 levels)

r : Makes the display brighter.

l : Makes the display darker.

l / r

u : Zoom in

d : Zoom out

• Press and hold

u / d to zoom

in/out quicker.

Select Front and press O.

Select either camera or video

recording using the soft keys.

Zoom

u / d

(Not available for the SXGA size photo)

Adjusts the white balance.

In the still camera mode, switches the flash or light as follows:

Auto Flash →Flash ON →Light (5 Min.) →OFF →Back to Auto Flash again.

In the video camera mode, switches the light as follows:

Light (5 Min.) →OFF →Back to Light (5 Min.) again.

Note: You can also press n to change the

camera lens from one side to

another.

;

Changes the image size between QQVGA, QVGA, VGA, and SXGA.

• While the front camera is used, SXGA is unavailable.

• While shooting a video, the image size can be switched between SQCIF and QCIF.

Note: You can also press ; in the still or

video camera mode to activate the

flash/spotlight.

Using the flash or spotlight

Switches the camera.

Various lighting functions are available.

“Auto Flash” enables the phone to

automatically switch on the light when

a photo is being taken in dark

surroundings.

Changes the display size; available when

is displayed, e.g., when the QQVGA size is used.

Showing the image in the viewfinder

at full-screen size

Switching the camera

If the phone is closed, only the front

camera lens can be used. When the

phone is open, you can select either

the camera lens.

• Press 0 while monitoring a

subject when the

displayed.

icon is

Using the Still and Video Camera

Setting the image quality

Adjusting the video/photo

Adjusting lighting compensation

Using the self-timer

(For still camera only)

Press [Options] while monitoring a

subject, select Image Settings

(Video Settings) and press O, and

then select Quality and press O.

Select Superfine, Fine, or Normal

and press O.

The colour of a photo can differ

Press [Options] while monitoring a

subject, select Camera Settings

and press O, and then select Self-

timer and press O.

Select a time before the shutter is

released from 10 Sec., 5 Sec., or 2

Sec., and press O.

depending on the lighting source, be it

natural or incandescent light. You can

compensate for the difference by using

the white balance to adjust the colour.

Your S750i is able to adjust the lens

exposure to suit various scenes. By

default, Normal is used.

Press [Options] while monitoring a

subject, select Image Settings and

press O, and then select Scene

and press O.

Press [Options] while monitoring a

subject, select Image Settings

(Video Settings) and press O, and

then select White Balance and

press O.

Superfine: Highest image quality but

large file size. Not recom-

mended if you want to save

many files as it consumes

more memory.

Press O to start the countdown.

Note: A beep sounds once every second

starting 3 seconds before the shutter

is released.

Select Normal, Night Scene, or

Select the white balance type from

the following options and press O.

• White balance options: Auto,

Sunny, Cloudy, Electric Light,

Fluorescent 1, and Fluorescent 2.

Light Shielding and press O.

Fine:

Highly detailed image

quality.

Setting the shooting time (For video

camera only)

Normal: Standard image quality and

relatively small file size so

This function allows you to set the

duration of a video recording time. The

recording stops automatically after the

set time. The default is 20 seconds.

you can save many files.

Note: You can also adjust the white balance

by pressing v while monitoring the

subject.

Using the Still and Video Camera

Notes:

Press [Options] while monitoring a

subject in the video camera mode,

select Shooting Time and press

Select a recording time from 5

Sec., 10 Sec., 20 Sec., 30 (50 or

60) Sec. or Maximum and press

Press [Options] while monitoring a

subject, select Image Settings and

press O, and then select Frame

and press O.

Select ON and press O. A frame

appears.

Press [Prev.] or [Next] to change

the frame pattern and press O to

select.

Select ON and press O. The

screen turns to Sepia colour.

Press [Prev.] or [Next] to change

the special effects and press O to

select.

The available patterns are: Sepia,

Black and White, Red, Green, Blue,

Purple and Negative.

• You can also press w while the still

camera or video camera is activated, and

the data size will change as follows:

• In the still camera mode: QQVGA

(120*160) → QVGA (240*320) → VGA

(640*480) → SXGA (1280*960,

unavailable for the front camera lens) →

Back to QQVGA (120*160) again.

• In the video camera mode: SQCIF

(128*96) → QCIF (176*144) → Back to

SQCIF (128*96) again.

Note: The available maximum recording

time is displayed when Maximum is

set. This time varies according to the

video data quality. The higher the

quality is, the shorter the recording

time is.

Inserting time and date (Date

Stamp) (For still camera only)

Changing the photo (video data)

saving size

Adding special effects to a photo/

video

This function enables you to add time

and date to a QQVGA or QVGA sized

still image.

You can select photo (video data) size

to store. The larger the size is, the

better the data quality is.

You can make the subject look

different by adding special and artistic

effects.

Taking a photo with a frame (For still

camera only)

Press [Options] while monitoring a

subject, select Image Settings and

press O, and then select Date

Stamp and press O.

Press [Options] while monitoring a

subject, select Image Settings

(Video Settings) and press O, and

then select Image Size and press

You can add a frame to a photo before

it is taken. Note that when a photo is

taken with a frame, you cannot

remove the frame afterwards. Image

setting must be on QQVGA, or QVGA.

Press [Options] while monitoring a

subject, select Image Settings

(Video Settings) and press O, and

then select Special Effects and

press O.

Select a photo size (video data

size) and press O.

Using the Still and Video Camera

Select a pattern from DDMMYY,

HH:MM or DDMMYY HH:MM and

Setting a shutter capture tone

Press [Options] while monitoring a

Selecting the storage location (SD

Card or Handset)

subject, select Camera Settings

and press O, and then select

Flicker-free and press O.

Select 50 Hz or 60 Hz and press

Press [Options] while monitoring a

subject, select Camera Settings

and press O, then select Shutter

Tone and press O.

press

O. If you select OFF, no date

Before saving, you can select to save

your photos or videos either on the

handset or on the inserted SD Card.

stamp is made.

• You can also change the date

stamp colour. To do this, press

[Prev.] or [Next].

Select a shutter tone pattern and

press O.

Press [Options] while monitoring a

subject, select Camera Settings

and press O, and then select

Storage Device and press O.

Select Handset or Memory Card

and press O.

Adding skins to the edge of the

photo or video

Recording a video without sound

(For video camera only)

Reducing flicker

You can add or change the skin

(frame) of a photo or video (only

available for QQVGA sized photo when

you use the still camera function.).

Occasionally the image may flicker due to

less than optimal local frequency. You can

use the “Flicker-free” function to reduce

this problem. Flicker is likely to occur

when you move between areas using

different frequencies (50 hertz or 60 hertz).

Press [Options] while monitoring a

subject, select Video Settings and

press O.

Select Voice and press O, then

select OFF and press O.

Checking the remaining memory

Press [Options] while monitoring a

subject, select Camera Settings

and press O, then select Skins

and press O.

Press [Prev.] or [Next] to change

the skin type and press O to

select.

You can check how much memory has

been used and remains for storing as

a percentage and in megabytes.

Note: It is possible that the flicker may not

be eliminated completely even after

the setting has been changed.

Press [Options] while monitoring a

subject, select Usage Status and

press O.

However, this is not considered to be

a problem with the phone.

Using the Still and Video Camera

• You can switch between

Managing stored images

checking the remaining memory

on the handset and on the SD

Card by pressing [Handset] or

[SDCard].

Accessing the Picture Album and

the Video Album

• In Standby mode, press [Menu],

highlight

and press O.

Referring to the on-screen Key

Guide

Address Book

For details about operations on stored

photos or videos, see pp. 81 to 89 in

the Media Album section.

Press [Options] while monitoring a

subject, select Key Guide and press

O. Use u / d to view other guidance

items. Press O or B to return to the

monitoring (or recording) display.

Address Book

The Address Book consists of

Press [Save] when finished

entering.

Other page

Creating a new contact

Nickname

Job title

Contacts, Call History, and Owner

Information. You can store information

about people you frequently call in

Contacts, and your own information in

Owner Information. In Contacts, you

can store multiple phone numbers,

email addresses, street addresses,

web pages, and other information

such as birthdays or anniversary

dates. You can also use Contacts to

dial phone numbers and compose

email, Text or Picture messages

directly. Contacts on the handset are

stored from Contact numbers 250 to

749, Contacts on the USIM are stored

from 0 to 249. The location of the

Contact number and the number of

Contacts that can be saved may be

different depending on your USIM

card.

Address Book

Other

• In Standby mode, highlight

using d and press O, and then

select New Contact and press

O. Or

[Nickname]

[Job Title]

[Birthday]

[Address 1]

[URL]

Birthday

Entry items and icons in a contact

Street address

Web page (URL)

Note

Main contact page

[Note]

First name

Makes the contact a

private entry.

Address Book

• In Standby mode, press l / r,

press [Options], select New

Contact, and then press O.

Select the desired item and press

O to enter the information for the

new contact.

OFF

Last name

Contact

Select

Save

[First Name]

Company name

[Last Name]

Phone number

[Company]

• For contacts saved on the SIM/

USIM card, you cannot store the last

name and the company name as

well as items in the Personalised

page and Other page above.

[Phone Number 1]

[Email Address 1]

[Group No.]

Email address

Group

Image

[Image]

Select

Save

Contact Location

• Contact information stored on

the phone consists of three

windows. Press r, to display the

second window (Personalised

page) and enter the desired

information. Press r again, to

display the third window (Other

page), and enter/modify desired

information. Contacts on the

SIM/USIM card are limited to first

page items only.

Personalised page

• When assigning a Contact Location

(Quick Dial No.), the smallest

Sets a ringtone for a

voice call when ON.

Sets a ringtone for a

video call when ON.

Sets a ringtone for

Text Message when

ON.

Address Book

Personalised

OFF

available number on the handset’s

memory is automatically assigned

when you start creating a new

Address Book entry. If you want to

edit the number, use u / d or enter

numbers directly into the entry fields.

(Limited to 3 digits).

OFF

Sets a ringtone for

Picture Message when

ON.

Select

Save

Sets a ringtone for

email when ON.

To go to a Contact Location from 0

to 249, press [Copy to].

Address Book

Viewing or editing a contact

Creating or editing a contact from

other functions

Select the group you want to edit

and press O. The Group Details

display appears.

• Refer to steps described on p.

114 for how to set a notification

pattern.

Assigning the contact to a

group

In Standby mode, press l / r to

access the Contacts List.

Highlight the contact to view, press

O, and press [Edit].

Highlight the item to change and

press O. Use l / r to switch to a

different contact screen (available

for contacts stored on the phone),

if you want to edit the notification

sound setting or other items such

as street addresses or note etc.

Make the changes and press

[Save].

For example, after entering a phone

number in Standby mode, you can

press O to go to the contact creation

step. From other functions such as

dialled call history, press [Options],

select Save to Address Book and

you can go to the contact creation

step. In these cases, you will be asked

to select from New Contact or Add to

Contact. Select New Contact to

make a new contact or select Add to

Contact to edit the existing contact.

If you assign each contact to a group,

searching contacts becomes a lot

easier. You can set the same type of

notification sound to the same group

of people. By default, a new contact is

assigned to Group 0.

Press [Save] to complete the setting.

Open a contact, press [Edit], then

select and press O.

Select the group that you want to

assign the contact to and press O.

Press [Save].

Editing the group name or assigning

a group notification pattern

Select a contact in the Contacts

List display and press [Options].

Select Address Book Settings

and press O, and then select

Manage Groups and press O.

Address Book

Note: You can set sound, volume, display

pattern, and notification durations for

the notification pattern.

Changes the icon to your

favourite

Edits the group name

Assigns a notification pattern to

the group for when you receive a

voice call from the group.

Assigns a notification pattern to

the group for when you receive a

video call from the group.

Accessing the Contacts List

• In Standby mode, press l / r.

The Contacts List

The Contacts List displays the names

of your contacts in alphabetical order.

If you want, you can sort the Contacts

List in several other ways to make

searching easier according to the

situation.

• In Standby mode, select

using d

and press O, and then select

Address Book and press O.

• In Standby mode, press [Menu],

highlight

and press O, then

select Contacts List and press O.

Assigns a notification pattern to

the group for when you receive a

Text Message from the group.

Assigns a notification pattern to

the group for when you receive a

Picture Message from the group.

Assigns a notification pattern to

the group for when you receive an

email from the group.

Caution: Always keep a hard copy of the

Contacts information separately

or transfer them to your PC using

Bluetooth or Infrared, since data

stored in Contacts in your phone

memory may be lost in rare cases

of accidental malfunction or if the

battery is not installed for a long

time.

Searching the Contacts List

Press [Options] in the Contacts List

display, select Search, and then

press O.

Select the desired Search

parameters and press O.

Select the desired contact.

Address Book

Tip: You also can open the Contacts List in

alphabetical order by pressing and

holding the corresponding numeric key

from the Standby display. For example,

for “John,” press and hold 5 in

Standby mode. At this display, you can

press [Switch] to switch the list order

to a call frequency ordered list or

alphabetical ordered list within the

alphabet characters allocated to that

key.

Calling a contact from the Contacts

List using ABC Search mode

Calling a contact from a contact

display

Finding a contact by entering a

name

In Standby mode, press l / r to

open the Contacts List.

In Standby mode, press l / r to

open the Contacts List.

Select the contact, and press O to

open the contact.

Select the number to call, and;

• Press t to make a voice call. Or

Enter the person's first name (as long

as it's registered in your Address

Book) and select the entry by pressing

O. Even entering the first couple of

letters of the person's first name and

pressing O will work for this search.

Press the numeric key on which the

first letter of the contact’s first

name is printed. For example, for

“John,” press 5. The cursor

moves to the corresponding name

group J, K, and L in alphabetical

order.

• Press

call.

or v to make a video

In Standby mode, press l / r to

open the Contacts List.

Press [Options], select Search and

press O, and then select Name

Search and press O.

Select the contact to call and,

• Press t to make a voice call. Or

• Press

or v to make a video

call. Your phone will call the

Enter the name and press O.

Contacts corresponding to the

name are displayed.

person’s default number. To call

other phone numbers the person

has, open the contact and select

a number. See “Calling a contact

from a contact display” as stated

below.

Address Book

Deleting a contact, all contacts or

selecting a contact to delete

Setting the contact as a private

entry

Sending a message from a contact

Registering a contact as a Schedule

entry

Open the contact to which you

want to send a message, or select

the contact in the Contacts List.

Press [Options], select Create

Message and press O.

Select a phone number or email

address you want to send the

message to and press O.

Select the message type and press

In Standby mode, press l / r to

open the Contacts List.

Use this feature after setting Privacy

Mode to ON. If Privacy Mode is set to

OFF (default), the private setting icon

will not appear. For details about

Privacy Mode, see p. 125.

You can register a future event for

notification such as a birthday etc.

Select the contact to delete, press

[Options], then select Delete and

press O. A selection window

appears.

Open the contact you want to

Press [Options], scroll down to

Save to Schedule, and then press

O. You have two saving options;

Save as Normal and Save as

Private.

• To delete one, select Delete and

press O. Then press [Yes] to

confirm.

Open the contact display you want

to hide from others.

Press l to go to the screen titled

Other, press [Edit] and then select

and press O.

• To delete all, select Delete All,

enter your security code and

press [Yes] to confirm.

• To delete selected, select Delete

Multiple, mark the contacts to

delete by pressing O, and then

press [OK]. Press [Yes] to

confirm.

A new message creation display

appears. Follow the steps

described on p. 68.

Select Save as Private if you want

to save it as a private entry and

select Save as Normal if you want

to save as a general entry.

Select ON and press O. Press

[Save]. Now the contact is saved

as a private entry. To hide the

contact, go to Privacy Mode and

select OFF. If you want to display

these private contacts, set Privacy

Mode to ON.

Address Book

Entry items and icons

Sending your Owner Information

Owner Information

• Use l / r to change between

pages.

Open the Owner Information

display and press [Options].

Select Send vCard and press O.

Select Attach to Message and

press O.

Press [Yes], if you have no picture

set in your Owner Information

settings. If you do have a picture

set, select either With image or

Without image and press O.

Select Picture Message or Email

and press O.

Enter a phone number or email

address in the To: field and press

Enter your message in the Subject:

and message fields if necessary

and press O after each.

Saving your own information (Owner

Information)

Own Info 1 page

First Name

In Standby mode, press [Menu],

select and press O.

Last Name

Company

Job Title

Phone number 1

Email Address 1

Image

Select Owner Information and

press O. The Owner Information

display (Owner Info 1 page)

appears with the number of your

phone inserted.

Own Info 2 page

Phone number 2

Phone number 3

Phone number 4

Phone number 5

Email Address 2

Address 1

Press [Options], select Edit and

press O.

Enter your security code and press

Select the item and press O to edit

each item. See below for entry

items.

Additional Info page

After editing each item, press O.

Press [Save] to complete editing.

Address 2

Note

Birthday

URL

Messaging

Highlight the message field and

enter your message text, then

press O when finished.

Press [Send].

Creating an Picture Message

General Information

Creating a new message

You can send messages with photos,

videos, sound or slides.

The S750i supports various types of

messaging services such as Text

messaging, Picture Messaging, and

Email. With Picture Messaging you can

create, insert and send pictures or

videos. Using the Email services, you

can attach several files such as

pictures, videos, or sound files and

send them to any desired email

address. You may need to subscribe

for an email account in order to use

email. Contact your nearest Orange

stockist. You need to first setup your

email account in order to use email.

See p. 28 in the “get started with your

Sanyo S750i” guide.

In Standby mode, press [Menu],

highlight

and press O, and

then select New Message and

press O.

Inserting a still image into a message

Highlight the message field, press

[Options], select Picture and press

Draft

SMS

To:

Select From Media Album to

retrieve a stored photo or select

Take Picture to take a photo and

insert it into the message.

Send

Options

Inserting a video into a message

Select the message type from Text

Message, Picture Message, or

Email and press O.

Highlight the message field, press

[Options], select Sound & Video

and press O.

Press O and enter the recipient’s

phone number or email address in

the To: field.

Select Select Video to retrieve a

stored video or Video Recorder to

shoot a video and insert it into the

message.

Messaging

Attaching a sound or your voice to a

message

Setting the transition time for slides

Sending a message from a contact

Useful message functions

By default, the transition time for slides

is set to five second. You can change

this duration.

Open the display of the contact to

which you want to send a

message, or select the contact in

the Contacts List.

Adding a signature to the message

Highlight the message field, press

[Options], select Sound & Video

and press O.

Your name, company, job title, phone

number or email address can be

added to your message as a signa-

ture.

Select Select Sound to retrieve a

stored sound or select Voice

Recorder to start recording and

attach it to the message.

Highlight the message field, press

[Options], select Slide and press

Press [Options], select Create

Message and press O.

Select a phone number or email

address and press O.

Select Text Message, Picture

Message, or Email and press O.

Enter message content in the

message field and press O.

Press [Send].

• To edit or set a signature to On, go

to Look & Feel settings. (See p. 79.)

Select Personalisation and press

O, and select Edit Signature and

press O. Press [Edit], edit the

current signature and press O, then

press [Save]. After entering/editing

your signature, set Enable/Disable

Signature on the Personalisation

display to Always. It will now be

automatically added to any new

message you create.

Select Slide Interval and press O.

Enter the time in seconds (1-60)

and press O.

Inserting slide pages

Highlight the message field, press

[Options], select Slide and press

Changing the text colour or size

Highlight the message field, press

[Options], select Text Options and

press O, and then select Text

Colour or Text Size and press O.

Select the desired colour or size

using the navigation keys and press

Select New Slide and press O.

Select Insert Before or Insert

After and press O.

Insert Before: Inserts a slide before

the current slide.

Insert After: Inserts a slide after the

current slide.

Messaging

Adding multiple recipients

Adding attachments

Requesting a Delivery Report or a

Read Report for a Picture message or

Text message you are creating

Assigning a notification sound for

message arrival

You can add up to a maximum of 20

recipients to any one message using

Picture Message and Email.

You can attach files to the message

you are sending using Picture

Message and Email.

You can assign a notification pattern to

be heard when you receive a message

and to distinguish the sender of the

message. See p. 55 and p. 114 for

details.

Before sending, from the address

input display, press [Options],

select Settings and press O.

Select Read Report or Delivery

Report and press O

After selecting the message type,

highlight the message field and

press O, press [Options], select

Add Field and press O.

After selecting the message type,

highlight the message field, press

[Options], select Attachments and

press O.

Select Yes to activate the function.

Saving the message as a draft

Select To, Cc or Bcc and press O.

The corresponding new address

input field appears.

Select Attach Image, Attach

Sound, Attach Video, or Attach

File and press O.

Select the folder and desired file

you want to attach to the message

and press O.

• Press [Options] from the message

creation display, select Save Draft

and press O. The message is saved

in the Drafts folder.

Read Report: Requests notification

that the recipient has

opened the message.

Delivery Report: Requests notification

that the message has

Note: Only “To” is available for Text

Message.

been delivered.

Note: You can also attach a new file

(Picture, video or voice recording) to

the message by selecting Take

Picture, Voice Recorder, or Video

Recorder in step 2 above.

Tip: You can also define these settings

before starting to create a message.

Go to Message Settings from the

Messaging menu. See p. 77 for

details.

Messaging

(A)

Select a new message and press

O to display it.

Select the message to display and

press [View] to open the message.

• Options available from this

display are: Delete, Call

Contact, Lock, Forward, Save

to Contacts.

Opening messages

Text Message Received

John Smith

When finished reading or displaying

the message, press B to return

to the Inbox and check other new

messages or press y to return to

the Standby display.

Opening messages at the time of

reception

When a message arrives, a notification

picture or video appears with the

sound or vibration pattern you set.

(See p. 55 and p. 114 for how to set a

Message notification pattern.)

Sending messages from the Inbox

(B)

Managing the Inbox

Press [Menu] in Standby mode,

highlight and press O, and

Replying to the received message

Open the Inbox and select the

message you want to reply to.

Press [Options], select Reply or

Reply All and press O.

Enter the message text and press

[Send].

Picture Message Received

John Smith

10:10

12/12/05

After reception of the message is

finished, display (A) appears. When

the sender’s phone number is

registered in the Address Book,

their name and phone number will

appear on the display. On pressing

O or after waiting for a while,

display (B) appears. To read or view

received message(s), select

Orange UK

then select Inbox and press O to

open the Inbox.

• Options available from this

display are: Reply, Reply All,

Forward, Delete, Delete All, Get

Email, Call Contact, Lock

(Unlock appears if the message

is already locked), Mark as Read

(Mark as Unread), Sort,

Camera

Email Received

John Smith

(Messages) and press O, and then

select Received Messages and

press O. The Inbox appears.

Message Details (Error Details),

Mark Items.

Messaging

Forwarding the message to another

person

Managing Sent or Draft messages

Picture Message settings

Message Settings

To open sent or draft messages,

press [Menu] in Standby mode,

Sending:

Open the Inbox and select the

message you want to forward.

Press [Options], select Forward

and press O.

In the To: field, enter the phone

number or email address and press

Changing your Message Settings

Validity Period: Sets the duration for

how long messages are

saved on the server. The

default is set to 1 Week.

Delayed Delivery: Delays message

sending time. The default

is set to None Specified.

Reports: Two types of Report settings

are available. To request

notification that a Picture

Message has been

highlight

and press O.

Press [Menu], highlight

and

Select Sent or Drafts and press

Select the message you want to

open and press O.

press O, and then select Message

Settings and press O.

Select Text Message, Picture

Message, Email, or Look & Feel

and press O.

In the Subject field, enter the

message and press O.

Press [Send].

Text Message settings

Message Centre: Selects or edits the

message centre number

for Text Messages.

opened by the recipient,

set Read Report to Yes.

To request notification that

a Text Message or Picture

Message has been

Sending:

Validity Period: Sets the duration for

how long messages are

saved on the server. The

default is set to 1 Week.

Delivery Report: Requests

notification that a Text

Message has been

delivered, set Delivery

Report to Yes.

delivered.

Messaging

Receiving:

Acknowledge: Selects how to respond

to a Picture message if

Max Message Size: Sets a limit to the

email size for download-

ing, or downloads

Look & Feel settings

Frequency: Selects whether or not to

defer message reception

according to the message

capacity. Options are

Use this setting to change the look of

message contents. For example, you

can enter or edit a signature

(Personalised text template), or

change the text position in messages

the sender is requesting a

Delivery Report or Read

Report notification upon

receipt of this message.

The options are Always,

Never, and Ask First.

messages without any

restriction on the email

size.

Immediately (default),

Always Defer, or Defer if

over 1 KB (10KB, or

Delete Preference: Selects From

Phone Only if you want

to keep messages on the

server when deleting

messages or From

Font Size: Selects the font size for

the message you are

reading.

Slide Interval: Sets the slide duration

time in Picture Messages.

The default is set to five

second.

Personalisation: Adds or edits a

signature inside mes-

sages. Select Edit

50KB).

Note: Ask First is only selectable from Read

Roaming: Selects whether or not to

defer message reception

when you are roaming

according to the message

capacity. Options are

Report display.

Server if you don't want

to keep messages on the

server.

Email Settings

Polling Interval: Selects the time

frequency for polling for

emails. The default is set

to Never, which means

polling is never done.

Account:

Creates or edits email

account details.

Immediately (default),

Always Defer, or Defer if

over 1 KB (10KB or

For details, see p. 28 in

the “get started with your

Sanyo S750i” guide.

50KB).

Signature to make/edit a

signature. To enable the

signature, set Enable/

Disable Signature to

Always.

Reject Anonymous: Rejects anony-

mous messages.

Polling Size: Selects how many

messages are to be

downloaded when polling.

The default is set to 10

messages.

Media Album

The Media Album is a data manage-

ment function. It uses folders to

manage various kinds of data stored in

the phone or on the SD Card.

Accessed from the main menu, you

can go to the Media Album to sort,

preview, move, copy, or delete files, or

edit file names. You can also associate

an image with a contact or attach it to

a message from the Media Album.

Creating a new folder

Select the function item from

Wallpaper, Ringtones, Address

Book, Calendar, Schedule, Alarm

Clock, Sound Effects, Video Call

Tone, Hold Settings, Alternate

Video, and press O.

Saving data into folders from other

functions

Press [Menu], highlight

press O.

Press [Options], select Create

Folder and press O.

Edit the folder name and press O.

and

You can save data into the Media

Album immediately after taking photos

or shooting videos or when opening

attached files.

Notes: • Additional functions that use

Ringtones are:

Saving a photo you just took

Using files for other functions

Press [Options] immediately after

taking a photo, select Save to and

press O.

Incoming Call, Incoming Text

Message, Incoming Picture

Message, Incoming Email,

Incoming Delivery Report,

Incoming Push, or Incoming

Video Call.

• Additional functions that use

Sound Effects are Opening

(Sound made when sliding the

phone open) and Closing (Sound

made when sliding the phone

closed).

You can set a file in the Media Album

to be used as wallpaper, an incoming

call notification, or a message arrival

notification. Note that options menu

vary according to functions used.

Opening stored files

Select the Picture folder or another

available folder and press O.

Open the Media Album display.

• Press [Menu] →

Select a folder from the list and

press O.

Select a file you want to open and

press O.

From the Media Album display

select and open a folder then open

a file you want to use for another

function.

Press [Options], select Settings

and press O.

Media Album

Saving the video you just took

Text:

Selects Very Small,

Small, Standard, or

Large as the text size and

allows you to enter text to

paste into the picture.

Editing a video

Editing photos/videos

Press [Options] immediately after

shooting a video, select Save to

and press O.

• Open a video in the Video List folder,

press [Options], select Edit Video,

and then select one of the following

items and press O.

You can edit photos or videos stored

in the Media Album.

Select the Video List folder or

another available folder and press

Paste Image: Selects up to 20 photos

(Only QQVGA [120 X160]

or smaller sized pictures)

to paste from the Picture

folder, Documents folder

or another folder if you

Editing photos

Re-record Voice: Records sound onto

a video that has no sound

or over-records new

• Open a photo in the Picture folder,

press [Options], select Edit Image,

and then select one of the following

items and press O.

sound onto a pre-

recorded video.

have created one.

Caption:

Inserts a caption onto the

video (Up to 10 captions

available for each video).

Scaling:

Stamp:

Enlarges/Reduces the

display size.

Selects Original or Media

Album to find a desired

marker stamp.

Rotate:

Rotates the photo 90

degrees each time

is pressed.

• To create the text, press

Special Effects: Adds an effect to the

picture from Sepia, Black

and White, Tile, Portrait,

Fade-out, Spotlight,

Poster, and Soft Focus.

Mirror Reverse: Mirror-reverses a

photo.

[Options], select New and press

O, and then enter the text.

• To edit the text, select the

desired caption, press [Options],

select Edit, then select Input

Caption, press O and edit the

text.

Frame:

Selects a frame by

pressing [Next] repeatedly

until a desired one is

found.

Image Format: Changes the file format

between JPEG and PNG.

Media Album

• To insert the text at the desired

point, select the caption, press

[Options], select Edit, then select

Start/End Time and press O to

start playing the selected video.

Press [Start] to indicate the start

point and press [End] to indicate

the end point.

Chapter:

Adds chapter titles to

video files in the Video List

folder.

Resizing a photo

To zoom out after zooming in,

press [Out].

This function allows you downsize a

photo in your Picture folder as long as

it is not a QQVA (120 X 160) picture.

Sending a photo/video attached to

a message or via Infrared

Previewing a video with a chapter

title (For video camera only)

Open the photo, press [Options],

select Resize and press O.

Select QVGA (240 X 320) or

QQVGA (120 X 160) and press O

to create a smaller size photo.

Press [Enlarge] or [Reduce].

Highlight the desired photo or

video, press [Options], select Send

and press O.

Select Attach to Message or

Send via Infrared and press O.

This function enables you to preview a

video with a chapter title.

Capture:

Freeze-frames an image

in the video and stores it

in the Picture folder.

Clips a segment of the

video for moving to

another point.

Open the video you want to

preview, press [Options], select

Play Chapter and press O.

Select a chapter from the Chapter

List and press O.

Clip:

Zooming a photo in or out

Cut:

Deletes a segment of the

video.

This function enables you to zoom in

or out on a still photo in the Picture

folder. The function is available only for

photos of VGA size or larger.

Combine Video: Joins the currently

viewed video with another

retrieved from the Video

List folder, Documents

Open a photo, press [Options],

select Zoom and press O.

Press [In] to zoom in by 5%. Press

[In] repeatedly until the desired

zooming is reached.

folder or another folder if

you have created one.

Media Album

Changing the display format of

photos or videos (Change Display

Format)

Moving or copying photos or videos

to a User Folder

Sorting data in the Picture folder or

Video List folder

Creating stamps and frames using

data in the Picture folder

Highlight a photo or video in the

list, press [Options], select Move to

Other Folder or Copy to Other

Folder and press O.

Open the Picture folder or Video

List folder, highlight the desired file

and press [Options], then select

Sort and press O.

Open a QQVGA (120 X 160), or

QVGA (240 X 320) picture, press

[Options], select Create and press

This function enables you to change

display formats. A 9-thumbnail-image

display of the Picture folder or Video

List folder is initially shown. If you

change the screen setting to 25 Image

View, a 25-thumbnail-image display is

shown. If you want to see a list of data

file names, select List View.

• From the Move to Other Folder,

you can select Move, Move

Multiple, or Move All in Folder.

From the Copy to Other Folder,

you can select Copy, Copy

Multiple, or Copy All in Folder.

If you have selected moving or

copying multiple items above,

select by pressing O and then [OK]

to finish.

Select Sort by Name, Sort by

Category, Sort by Size or Sort by

Date and press O.

Select Ascend or Descend and

press O.

Select Stamp or Frame and press

Select one and press O.

Press [Save] when you finish editing,

enter a file name and press O.

Note: The items in More Pictures, More

Videos or More Melody & Ringtones

cannot be sorted.

Highlight the desired photo or

video, press [Options], select

Change Display Format and press

Select 25 Image View, 9 Image

View, or List View and press O.

Select the destination folder and

press O.

Notes: • 25 Image View, 9 Image View, or

List View is available for the

Picture folder.

• 9 Image View or List View is

available for the Video List folder.

Using the SD

Memory Card

Using the SD Memory Card

• The SD Card has a lock to prevent

the overwriting of stored data.

A Secure Digital Memory card (SD

Card) is a compact and portable

Inserting the SD Card

Push the card slightly in and then

release. The card will then spring

out from the card slot.

Pull out the card and close the card

cover.

Make sure that the phone is turned

OFF.

memory storage device. The S750i

enables you to use an SD Card to

store photos, video images, sounds,

contacts, and downloaded data that

have no restrictions. This is convenient

for transferring to a personal computer

as well as printing images directly from

the SD Card using the DPOF printing

function. You can also access the SD

Card content by pressing the left soft

key when using the Media Album.

To lock the card, move

the tab to the position

shown in the diagram.

Open the cover of the SD Card slot

as shown in the diagram.

With the label side facing towards

the front, insert the SD Card slowly

into the card slot.

Formatting the SD Card

Push the card in until a click is

heard.

Before using a new SD Card which

has not yet been formatted or a card

which has been used in a PC or other

device, use this function to format the

card. Note that all the data stored on

the card is deleted when you format it.

• Recommended SD Card capacity to

be used: up to 512 MB

Close the card cover.

Turn the phone on.

Check if the icon

has appeared

Inserting or removing an SD

Card

on the display to indicate that a

card is inserted. If not, try inserting

the card again from the beginning.

Caution: It is strongly recommended that

you keep a backup copy of the

data stored on the card as an

unexpected occurrence may

Press [Menu], highlight

and

press O, then select Memory

Settings and press O.

Select Memory Card and press O,

then select Format Memory Card

and press O.

result in the data being lost.

Removing the SD Card

Notes: • An SD Card which has been

formatted by another device such as

a personal computer may not

Make sure that the phone is turned

OFF.

Open the cover of the SD Card

slot.

operate correctly with the S750i. Try

re-formatting from the handset. (See

p. 93 “Formatting the SD Card”)

Enter your security code and select

[Yes] at the confirmation display.

Using the SD Memory Card

Caution: Do not try to remove the SD Card

Icons related to data on the SD

Card

Save to Memory Card: Saves the

selected type of data in

the memory of the phone

onto the SD Card as

Using the SD Card

while formatting.

An SD Card is inserted.

A write-protected SD Card is

inserted.

Transfer (backup) functions

Example: Accessing the Media Album.

You can transfer (backup) data to or

backup data. Enter your

Media Album

Digital Camera Folder

Picture

from the phone and the SD Card. Take

care while performing a backup as in

either case data in the saving location

is overwritten.

security code to proceed.

Read from Memory Card: Saves the

selected type of data on

the SD Card in the phone

as backup data. Enter

Note: If an unsupported SD Card is inserted

into the phone, the icons shown

above will not appear.

Video List

Melody & Ringtones

Documents

Press [Menu], highlight

press O,

and

your security code, and

then select [Yes] at the

confirmation display.

Handset

Options

Select Memory Settings, Memory

Card, then Backup and press O.

• A data selection window

appears. Select backup data

from All, Picture, Video List,

Melody & Ringtones, and other

similar items.

Checks memory status of the SD Card

or phone and allows you to reset and

clear all handset memory as well as

format the SD Card.

To open the Settings menu, press

[Menu] in Standby mode, highlight

and press O.

Profiles (p. 108)

Normal:

Silent:

Sets the normal profile.

Sets vibration ON and sets

all incoming tones OFF.

Sets ringers and vibration

OFF.

Browser Settings

Profiles

Call Settings

Car:

Sets various web related browser

settings such as scrolling and security,

etc.

Changes the ringtone volume and

other reception conditions.

Selects Call settings such as call

diverting, rejecting calls, Auto Answer,

call waiting, Call Barring or Answer

Phone feature.

Meeting: Sets all incoming tones to

the lowest volume.

Loud:

Sets the volume of all tones

to the highest volume.

Display

Connectivity

Changes the display settings such as

character input mode or light, or

Standby display.

Selects how Bluetooth and Infrared

functions are used.

Outdoor: Sets the volume of the

caller’s voice to the highest

volume.

Custom: Customises tone volumes

for various situations.

Video Call Settings

Selects settings for video calling.

Security

Selects settings for locking the phone

and changing the security code or PIN

of the phone.

102

103

Settings

Display (pp. 109-112)

Phone Settings (pp. 112-121)

Sound Effects: Customises effect

tones for various situations.

Vibrate on Connection: Vibrates to

confirm the line connection.

Video Call Tone: Sets a melody to

sound until the caller

Security: Selects various security

settings for browsing.

Certificate: Selects the current

certificate or root certifi-

cate.

Advanced: Selects if you want to show

the title of the page while

browsing or selects to

convert service messages

that load automatically into

requests for service

Wallpaper: Sets the wallpaper for the

Standby display.

Character Input: Changes the input

mode and character size,

and enables editing of pre-

defined text or smileys.

Power Saving: Sets the idle time for

the power saving display.

Set Time & Date: Sets the clock.

Ringtones: Sets ringtones to incoming

calls or messages.

Melody Volume: Sets the melody

volume.

answers.

Line 2:

Switch between two phone

lines if you have this extra

service. (See p. 115)

Auto Power ON/OFF: Turns the phone

on or off at the time you

set.

Slide Activation: Answers or ends a

call by sliding the phone

open or closed.

Light:

Sets the light durations for

the display backlight and

the keypad backlight.

Flight Mode Setting: Cuts off the line

with the phone switched

on.

Language: Sets the display language

and the answering

messages, or ignore any

WAP based service

inquiries.

Standby Display: Sets wallpaper, time,

and display greeting.

Browser Settings (pp. 121-123)

LED:

Customises the LED colour

pattern for missed calls,

unread messages and

alarms.

language.

Connectivity (pp. 167-186)

Accessibility: Makes the display more

visible and the phone more

audible.

Select Network: Selects the network

area.

WAP Profiles: Displays a list of the

stored WAP profiles to

select and edit them.

Downloads: Disables images, sounds,

or other files that are

Infrared: Sends or receives files via

Infrared.

Bluetooth: Sends or receives files via

Bluetooth.

Synchronise: Synchronises files with

another device or a

loaded automatically when

you download a web page.

Look & Feel: Selects the character

size, text wrap, scroll step

and internet connection

time out.

network server.

104

105

Settings

Print Mode: Prints out still images via

USB.

USB Storage Mode: Transmits SD

Card data to a personal

computer.

Memory Settings (pp. 127-128)

Call Quality Alarm: Sets an alarm to

warn of weak signal

Video Call Settings (pp. 134-136)

Check Memory: Displays how much

space remains for data on

the phone.

Memory Card: Backs up data in the

Address Book, Schedule,

or To Do List and formats

the SD Card, etc.

Handset: Resets the memory

settings and clears memory

in the phone.

Reconnection Method: Sets the

method to switch a video

call to a voice call.

Image Settings: Sets if your image is

to be sent and its image

quality.

Voice Setting: Sets if your voice is

sent.

Auto Answer: Sets whether to receive

video calls automatically or

not.

strength.

Reduce Noise: Reduces ambient noise

to make the other party's

voice clearer.

Call Barring: Blocks outgoing and

incoming calls.

Call Waiting: Answers a call from a

third party while holding the

current call.

Play Answer Phone: Uses the phone

answering service.

Security (pp. 124-127)

Restriction Settings: Selects the option

to bar calls.

Privacy Mode: Sets the Privacy mode

ON/OFF to protect privacy

in contacts.

Change Code: Changes your security

code.

Set PIN: Allows you to set or change a

PIN (Personal Identification

Number).

Camera Settings: Sets zoom in or out

and the rear or front

Call Settings (pp. 128-133)

Fixed Dialling Number: Specifies the

available numbers for

Call Divert: Specifies the phone

numbers for forwarding.

camera.

dialling.

Backlight: Selects the backlight

brightness, minimum, or

normal.

Service Dialling Numbers: Selects

provided services that are

encoded on the SIM/USIM

card.

Hands-free Setting: Activates the

Hands-free function.

Reject Calls: Specifies the numbers to

be automatically rejected.

Hold Settings: Selects a picture or

video to display while you

have someone on hold.

Voice Call Auto Answer: Sets whether

to receive voice calls

automatically or not.

106

107

Settings

Car

Ringers and vibration are

OFF. Received calls will

appear in the missed calls

list when set to ON.

Changing input modes and

character size

Profiles

Display settings

This phone has seven types of

Profiles, and Normal is set as the

factory default setting.

Open the Character Input display.

Setting the wallpaper

• Press [Menu] →

→ Display →

Photos or videos that have been taken

or downloaded pictures saved in the

Media Album as well as preset

Meeting : All incoming call or

message tones are set to

the quietest. Beep sounds

are generated when an

incoming voice call or video

call arrives.

Character Input

Select from one of the items below

and press O.

Make the desired changes and

press O.

Activating or deactivating Profiles

pictures can be set as wallpaper.

• Press and hold B.

Open the Wallpaper display.

• Press [Menu] →

Wallpaper

→ Display →

Loud

: All tone volumes are set to

the loudest.

: Caller’s voice volume is

set to the loudest.

Selecting the Profile type

Input Method: Selects input mode

from Standard Text Input

(multi-press input) or T9

Text Input

Edit Pre-defined Text: Enables the

editing of text in 6

Open the Profile display.

The current wallpaper information is

displayed. Press O to proceed.

Select Original or Media Album

and press O.

Select the desired image and press

Outdoor

• Press [Menu] →

→ Profiles

Select the profile to use and press

the O key.

Custom : Ringtone Volume, key

tone volume, sound effects

volume and melody volume

can be customised. Press

[Detail], then [Edit] and

select settings for each

option.

categories, Internet,

Greeting, Message,

Response, Business, and

Free (a blank page to use

as desired).

Normal:

Silent

Set to regular ringing

pattern.

: Vibration is ON, and all

incoming call or message

tones are OFF.

Note: See p. 81 for details about the Media

Album.

Edit Smileys: Enables the editing of

various emoticons.

108

109

Settings

Notes: • When setting Key Light to ON, if

you also set Auto Key Light to

ON, the phone will automatically

determine if the keypad light

should be turned on or off

according to the brightness of the

surroundings to save battery

power.

Character Size: Selects the size from

Very Small, Small,

Setting the display backlight and

the keypad backlight

Wallpaper: Displays wallpaper on the

Standby display if ON is

selected. Changes to a

default background if OFF

is selected. For how to

Standard, or Large.

You can set the backlight for the

display and the keypad separately.

Setting the power saving mode

select the wallpaper, see p.

109.

Open the Light display.

• Press [Menu] →

→ Light

The S750i is set to turn off the display

illumination after a set idle time. The

default time is set to 30 seconds. The

display illumination is restored if you

press any key.

→ Display

• The display backlight settings

during a video call are defined

separately from these settings.

See p. 136.

Time & Date: Displays the time and

date in the 24-hour time

system on the Standby

display if ON is selected.

Display Greeting: Enables editing of

the greeting text displayed

when turning the phone on

if you are using a SIM/

Select from the following options

and press O.

Backlight: Sets the light duration

from 5 to 99 seconds.

Selects the brightness

from Minimum or Normal.

Key Light: Sets the light duration

from 5 to 99 seconds if

ON is selected. Turns the

keypad light off all the

time if OFF is selected.

See below for Auto Key

Light.

Customising the Standby display

Open the Power Saving display.

• Press [Menu] →

→ Display →

You can customise various settings for

the Standby display: Wallpaper ON/

OFF, Time & Date ON/OFF, and

Greeting words ON/OFF.

Power Saving

Select Show Screensaver or No

Screensaver and press O.

Enter an idle time (30 to 300

seconds) and press O.

USIM card other than the

one supplied by Orange.

Open the Standby Display.

• Press [Menu] →

→ Display

→ Standby Display

Select from the following options

and press O.

110

111

Settings

Changing LED illumination notifica-

tion patterns

Daylight Saving: Displays the clock in

Day Light Saving time.

Select the city corresponding to the

time you want to display on your

screen, and then press [Set] or the

O key.

Phone Settings

This function is used to select different

LED colour patterns to notify you of

missed calls, unread messages, or

alarm time occurrence (Schedule

alarm).

Setting the clock

Setting home area and time difference

It is recommended that you set the

clock before starting to use the phone

so that all time-related information is

displayed correctly. You will need to

set the clock to use the camera

functions etc.

This is an optional function for those

who travel between countries or those

who want to show the time in other

cities without having to adjust the

clock. You should set the Home Area

of your phone’s clock first, and then

set the desired city to display the local

time in the top right corner of your

standby display. Your home area and

the other area can be selected from 36

cities around the world.

Adjusting the clock to Daylight Saving

Time

If you set Daylight Saving to ON, your

phone will show Daylight Saving Time

without having to adjust the clock. If

you set this to OFF, the time shown on

the screen returns to the normal time.

Open the LED display.

• Press [Menu] →

LED

Select ON and press O, and then

select from either Missed Calls

(Voice Call, Video Call), Messages

(Text Message, Picture Message,

and Email) or Alarm (Schedule

alarm) and press O.

→ Display →

Open the Set Time & Date display.

• Press [Menu] → → Phone

Settings → Set Time & Date

Select from the following options

and press O.

Select Daylight Saving and press

the O key.

Select ON and press the O key.

Select Home Area and press the

O key.

Select the city for your home area

and press [Set] or the O key.

Select Time Difference and press

the O key.

Time & Date: Edit the current day/time

and year.

Home Area: Selects a city for your

home area.

Time Difference: Selects a city for the

time you want to display on

the screen.

Select a colour or OFF and press

Press [Save] to finish the setting.

Select ON and press the O key.

112

113

Settings

Note: While setting the ringtone for an

incoming message, the ringing time

can also be set by selecting the icon

in step 3 above. The choices are

Ring and Set Time. If Ring is

Setting ringtones for incoming calls

or messages

(Volume): Adjusts the ringtone

volume for an incoming call.

Using the alternative line service

(Line2)

You can set ringtones for notification

of incoming voice calls or video calls,

incoming messages or other notices

such as incoming Delivery Report or

incoming PUSH.

This function enables you to use

switch to another phone line to answer

and make calls.

(Image): Selects an image to be

displayed on the screen when there is

a call either from the preset (Original)

patterns or by searching through the

Media Album.

selected, the entire piece of music

plays; if Set Time is selected, you can

specify how long to play the music

when a message is received.

Open the Line2 display.

• Press [Menu] →

→ Phone

Settings → Line 2

Select Switch Line and press the

O key.

Select either Line 1 or Line 2 and

press the O key.

Open the Ringtones display.

(Vibration): Selects a vibration

pattern and its strength when there is

a call.

Setting the melody volume

• Press [Menu] →

→ Phone

Settings → Ringtones

Select the notification for which you

want to set the ringtone and press

Set each item below and press O.

• Press [Play] to check the current

pattern.

You can set the melody volume to one

of five levels for the following situa-

tions.

(LED): Selects an LED pattern and

colour to be indicated on the top front

edge of the phone when there is a call.

Tips:• To lock the setting, select Lock

Line, press O and enter PIN2 (See

p. 126).

• When playing sound data saved in

the Media Album.

• When playing sound data attached

to Picture Messages or Emails.

• When playing downloaded data.

• To edit the names of the lines, select

Edit Line Name and press the O

key.

Tip: If you press [Options] in step 1 on the

Ringtones display, you can select All

Incomings to set a ringtone for all

incoming calls and messages or All

Messages to set a ringtone for all

incoming messages (excluding

incoming calls).

(Melody): Selects a sound or

melody pattern to be heard when

there is a call either from the preset

(Original) patterns or by searching

through the Media Album.

Open the Melody Volume display.

• Press [Menu] → → Phone

Note: For further information, contact your

Orange stockist. This function is

available only when the inserted

USIM is designed for it.

Settings → Melody Volume

Adjust the melody volume using u /

d and press O.

114

115

Settings

Setting the phone to offline (Flight

Mode)

Setting the display language, date

format or decimal format

Setting heightened audibility and

better readability (Accessibility)

network. Making a list of network

operators and editing that list is also

possible. While editing you can also

prioritise the access order among

these operators.

Flight Mode disables call, message,

WAP and other network related

Open the Language display.

This function sets the character size to

the largest for situations such as when

you enter phone numbers, read

messages, search in Contacts, or

browse web pages. Also, the speaker

volume is set to the highest level so

you can hear the other party’s voice

better.

• Press [Menu] →

→ Phone

Settings → Language

functions although it is switched on.

This function is useful for when you

want to play a Java™ application on

an aircraft, where the phone should

not generate a radio signal. When the

To change the language, select

Display Language and press O.

To change the date format, select

Date Format and press O. To

change the decimal format, select

Decimal Format and press O.

Select the desired item and press

Opening the Select Network display

• Press [Menu] →

→ Phone

Settings → Select Network

mode is activated,

display.

appears on the

Setting the network area

Select Select Network on the

Select Network display and press

Open the Accessibility display.

• Press [Menu] → → Phone

Settings → Accessibility

Open the Flight Mode Setting

display.

Display Language: Selects from

English, Deutsch,

Select UMTS/GSM Dual, GSM

Only, or PCS Only and press O.

• If you select UMTS/GSM Dual, the

phone always goes to the UMTS

network first.

Press [OK] or O.

• Press [Menu] →

→ Phone

Settings → Flight Mode Setting

Select ON and press O.

• To release the setting, select OFF

at this point.

Français, and Italiano.

Selecting network area (Select

Network)

Date Format: Selects from DD/MM/

YYYY, DD.MM.YYYY or

YYYY-MM-DD.

This function enables you to select the

mobile phone network area. The S750i

can roam dual network areas. So you

can use the phone in the UMTS

Decimal Format: Selects from “.” or “,”

network area and/or the GSM

116

117

Settings

Select Auto or Manual and press

WAP Profiles

Setting the sound effects

Warning: Selects the warning sound

pattern and the volume on

performing a wrong

Selecting the type of WAP profile

You can customize an effect tone for

each setting described below.

• If you select Manual, you will

always be required to select a

network service operator from the

list. If you select Auto, selection of

network service operators depends

on the setting in the Edit Preferred

List (See below).

Open the WAP Profiles display.

• Press [Menu] → → Phone

operation.

Opening: Selects the sound pattern

and the volume on sliding

open the phone.

Closing: Selects the sound pattern

and the volume on sliding

the phone closed.

Open the Sound Effects display.

• Press [Menu] → → Phone

Settings → WAP Profiles

Select the profile type and press

Settings → Sound Effects

Choose a selectable event from the

list to use as the effect tone and

press O. Use u / d to adjust the

volume and press O to set. Press

[Tone] to select other available tone

patterns.

Editing the profile

Select a profile you want to edit,

press [Options], then select Edit

Profile and press O.

Putting priority on the order of network

operator access

Tip: To set the tone volumes for all the

situations above at one time, press

[Set All] in step 1 above.

Select Edit Preferred List from the

Select Network display and press

O. A list of network operators

appears.

Select an operator, press [Options],

edit the list using the options Add,

Insert, Change Order or Delete

and press O.

Select Browser Settings or MMS

Settings and press O.

Enter the necessary item(s).

Key Tone: Selects the confirmation

sound pattern and the

volume on pressing keys.

Completion: Selects the confirmation

sound pattern and the

Deleting the profile

Select the WAP profile you want to

delete and press [Options].

volume on completing

setting or registration.

Select Delete and press O.

118

119

Settings

Setting vibration to confirm the

connection

Open the Video Call Tone display.

• Press [Menu] → → Phone

Setting Auto Power ON/OFF

Answering or ending a call with a

sliding motion (Slide Activation)

You can set your phone to be turned

on or off automatically at a set time.

Settings → Video Call Tone

Select ON and press O to activate

the function. Two menu items

appear with icons. Press [Set] after

you finish completing the settings

below.

This function enables the phone to

vibrate when the other party’s phone

has detected your call. It is set to OFF

by default.

This function enables you to answer a

call by sliding the phone open or end a

call by sliding the phone closed.

Caution: Please make sure that Auto Power

ON is deactivated before boarding

an aircraft.

Open the Slide Activation display.

• Press [Menu] → → Phone

Open the Vibrate on Connection

display.

Open the Auto Power ON/OFF

display.

Settings → Slide Activation

Select Open to Talk or Close to

End and press O.

Select ON and press O.

• To release the setting, select OFF

at this point.

(Melody): Selects a sound or

melody pattern for a Video

Call Tone either from the

preset (Original) patterns or

by searching through the

Media Album.

• Press [Menu] →

→ Phone

• Press [Menu] →

→ Phone

Settings → Vibrate on Connec-

tion

Settings → Auto Power ON/OFF

Select Auto Power ON or Auto

Power OFF and press O.

Select ON and press O, and then

enter the time to turn on or off.

Press [Set] or O after you finish the

setting.

Select ON and press O.

Setting the melody played until your

video call is connected

(Volume): Adjusts the volume for

the Video Call Tone.

Browser settings

This function enables you to listen to a

melody instead of a ringing tone until

the other party answers your video

call.

Open the Browser Settings display.

• Press [Menu] →

→ Browser

Settings

Select from the following items and

press O.

120

121

Settings

Downloads: Disables images, sounds,

or other files that are automati-

cally loaded when you

• Character Size: Select the character

size from Very Small, Small,

Standard, or Large.

• Secure Prompt: Select ON or OFF if

you want or don’t want the

phone to notify you with a

prompt when the connection

turns from a protected one to

an unprotected one.

• Authentication: Select ON or OFF to

save or not save authentica-

tion to cache (temporary

memory storage used by the

phone).

• Send Referrer: Select ON or OFF if

you want or don’t want to

send HTTP Referrer header

information when using the

browser.

Certificate: Select to display the

current certificate or root

certificates.

Advanced: Select to display page titles

while browsing. Select to

accept or reject WAP based

service inquiries.

• View Title Region: Select ON or OFF

to display or not display the

title of page while browsing.

• Service Load: Select Convert to

convert service messages that

load automatically into

download a web page. Select

from the following to switch

disable ON or OFF.

• Text Wrap: Select to wrap words at

the end of a line. Select Word

Boundaries to automatically

wrap words to the next line at

the end of a line boundary, or

select Character Boundaries

to not wrap words at the end

of a line boundary.

• Scroll Step: Selects the scrolling unit

from Single Line, Half Page,

or Whole Page.

• Connection Timeout: Selects the

time to wait for the internet

connection from 60 Seconds,

90 Seconds or No Wait

• Disable Images: Select ON to block

images from automatically

downloading to make viewing

faster.

• Disable Sounds: Select ON to block

sounds from automatically

downloading to make viewing

pages faster.

• Disable Objects: Select ON to block

objects from automatically

downloading to make viewing

pages faster.

Look&Feel: Sets the character size,

text wrap boundaries, scrolling

attribute and connection

timeout.

requests for service mes-

sages, or select Ignore to

ignore any WAP based service

inquiries.

Time.

Security: Sets the following various

security settings for browsing.

• Current Certificate: Select to display

the current certificate.

• Root Certificates: Select to display a

list of root certificates.

122

123

Settings

Dial Lock: Locks all the keys and

restricts use of the phone

except for receiving calls,

making emergency calls and

diverting calls.

Lock Address Book: Locks use of the

Address Book or other related

functions.

Restrict Dial: Restricts use of call

histories or direct number

input to make outgoing calls.

Use of the Address Book is

available.

Auto Dial Lock: Sets Dial Lock

automatically every time you

turn the power on.

Setting Privacy Mode

Making a contact a private data item

Connectivity

Open the contacts list and open

the contact you want to keep

private.

You can assign “Private” status to a

contact in the Address Book or

Schedule or ToDo and make the entry

private, preventing others from seeing

the information. First, you have to set

Privacy mode ON. Then you must

make the entry in the Address Book

(or Schedule) a private entry. Finally, if

you set Privacy mode OFF, the private

entries will not be shown on the

display.

See p. 167 for details on connectivity.

Press [Edit], then l / r to scroll to

the “Other” display

Select the private setting icon

and press O.

Select ON and press O, then press

[Save].

Security settings

Locking the phone

The S750i provides several locking

modes which are described below.

When the restriction is set, you will

have to enter your security code to

proceed. This is so you can prevent

others from using your phone.

Setting Privacy mode ON

Open the Privacy mode display.

Note: As for Call Barring on the network

• Press [Menu] →

Privacy Mode

→ Security →

service, see p. 130.

Select ON and press O.

• When this setting is ON, private

contacts become accessible. When

this setting is OFF, private contacts

are not displayed on the screen.

Enter your security code.

Open the Restriction Settings

display.

• Press [Menu] →

→ Security →

Restriction Settings

Select a restriction option and

press O.

124

125

Settings

Note: Some SIM/USIM cards may not

Setting your own security code

Setting your own PIN Code

Enter your new PIN code again to

support this function. For these types

you will be asked to enter the PIN

every time you turn the phone on.

Make sure you enter the correct PIN

as you will have to enter the PUK if

you repeatedly enter the wrong PIN.

confirm and press O.

The phone’s security code is essential

to protect your phone from

This function enables you to change

the preset PIN. SIM/USIM cards that

are sold with a preset PIN. You can

use the card with the preset PIN.

However, it is recommended that you

change it to a PIN you have chosen

yourself to protect the card from

unauthorized use. There are two types

of PIN codes, the PIN1 Code and the

PIN2 Code. The PIN1 Code is used for

locking use of the SIM/USIM card

while the PIN2 code is used for

Switch PIN1 ON/OFF

unauthorised use or to avoid acciden-

tal operation. At the time of purchase

the security code is set to “9999”. We

strongly advise you to change the

initial security code to one of your own

choosing to keep your private data

secure in case the phone is lost or

stolen. Keep your new security code

private and if you make a note of it,

store that in a safe place separate

from your phone.

If this is set to ON, you will be asked to

enter the PIN every time you turn the

phone on. Conversely, if it is set to

OFF, PIN entry will not be requested

any time you turn the phone on.

Re-initialising your phone

Resetting all data or phone

functions

Open the Set PIN display.

• Press [Menu] →

Set PIN

Select Switch PIN1 ON/OFF and

press O.

Select ON or OFF and press O.

• You must enter your PIN to change

the setting. Enter the PIN and press

O to finish.

→ Security →

Caution: Be sure to make a copy of any

important data before performing

a reset operation.

restricting some network services.

Open the Change Code display.

Open the Set PIN display.

Open the Handset display.

• Press [Menu] →

→ Security →

• Press [Menu] →

→ Security →

• Press [Menu] →

→ Memory

Change Code

Set PIN

Settings → Handset

Select the desired resetting method

and press O.

Select Yes and press O.

Enter your security code (initially

9999).

Select Change PIN and press O.

Select PIN1 or PIN2 and press O.

Enter the current PIN code and

press O.

Enter a new 4-digit security code

and press O. Your security code is

changed.

Enter your new PIN code and press

126

127

Settings

Reset Settings: Resets the settings of

the phone to the initial

Open the Call Divert display.

• Press [Menu] → → Call

Settings → Call Divert

Select Voice or Video Call and

press O.

Select All Incomings, In Call,

When No Answer, or When Out of

Network, and then select ON and

press O.

Enter the destination number and

press O.

Specified Number: Rejects calls from

the numbers registered in

the list. You can add or edit

numbers to be rejected by

pressing [List].

Anonymous: Rejects calls from the

numbers intentionally set

as No Caller ID number by

the caller.

Payphone: Rejects calls from a pay

phone.

Unidentified: Rejects caller-unidentified

calls.

Open the Hold Settings display

• Press [Menu] → → Call

Settings → Hold Settings

Select Original or Media Album,

press O, and select the desired

video file.

settings at the time of

purchase.

Clear All Memory: Clears all the

memory contents such as

Contacts or call histories.

Reset & Clear: Resets all the function

settings and clears all the

memory contents.

Setting the Auto Answer (Voice Call

Auto Answer)

This function (available only with the

use of a headset) enables you to

receive calls automatically without

touching any keys after a preset

ringing time. For setting the Auto

Answer for the video call function, refer

to “Auto Answer” under the Video Call

settings section. (See p. 135.)

Enter your security code and press

[Yes].

Setting Reject Calls

Note: Data on a SIM card or SD Card is not

Non-registered No.: Rejects calls

whose numbers are not

stored in Contacts.

You can reject calls according to the

settings described below.

reset by this function.

Open the Reject Calls display.

• Press [Menu] → → Call

Call settings

Setting the Hold settings (for video

call only)

Open the Voice Call Auto Answer

display.

Settings → Reject Calls

Select ON and press O.

Enter your security code.

Select a rejecting method and

press O.

Call diverting service

This function enables you to select a

picture or video to display while you

have someone on hold.

Subscribing to this service enables

you to divert incoming calls to the

numbers you have specified. Setting

numbers for both voice and video calls

is available.

• Press [Menu] →

→ Call

Settings → Voice Call Auto

Answer

128

129

Settings

Select ON and press O.

• To release the setting, select

OFF.

Enter the answering time (1 to 29

seconds) and press O.

Setting restrictions on calls (Call

Barring)

Block Outgoing Calls: All Outgoing

Calls, Int’l except to

Home, or International

Calls

Block Incoming Calls: All Incoming

Calls or When Roaming

Call Waiting

This supplementary service notifies

you of an incoming call from a third

party while talking with a second party

and enables you to answer the third

party by putting the second party on

hold.

Call Barring enables blocking of

outgoing and/or incoming calls. The

Call Barring password is initially set to

1111. You can make an emergency

call even if Call Barring is set to ON.

Subscribing to the service centre is

required for the service.

Setting Call Quality Alarm ON

Notes: • If you want to confirm the current

settings of both call barring

services, select Check Setting in

step 2 above.

If this function is activated, a beep

sounds when the signal strength falls

below the level suitable for communi-

cation during a call.

Open the Call Waiting display.

• Press [Menu] → → Call

• If you want to set a new password

for roaming another service

network, select Set Password in

step 2 above.

Open the Call Barring display.

• Press [Menu] → → Call

Settings → Call Waiting

Select Voice or Video Call and

press O.

Select ON and press O.

• To release the setting, select

OFF.

Settings → Call Barring

Open the Call Quality Alarm display.

• Press [Menu] → → Call

Settings → Call Quality Alarm

Select ON and press O.

• To release the setting, select

OFF.

Select Block Outgoing Calls or

Block Incoming Calls and press

O, and then select whether to

block the following types of calls.

130

131

Settings

Playing answer phone messages

(Play Answer Phone)

Fixed Dialling Number

Adding a Fixed Dialling Number

Setting the Hands-free function

Open the Fixed Dialling Number

display.

When the Fixed Dialling Number is set

to ON, you can limit your calls to only

the phone numbers registered on the

SIM/USIM card. You can add or edit

the phone numbers (up to 40 digits).

You must subscribe for this service.

The Hands-free function enables you

to talk with the phone placed on a flat

and stable surface. The sound coming

from the speaker is made louder and

the microphone sensitivity increased.

Open the Play Answer Phone

display.

• Press [Menu] →

→ Call

Settings → Fixed Dialling

Number

• Press [Menu] →

→ Call

Settings → Play Answer Phone

Select Play Message and press

Press [Call]. The call is connected

to the message centre after which

you can listen to the answer phone

messages.

Press [List], enter PIN 2 and press

O. Press [Options] then select

New and press O.

Open the Hands-free Setting

display.

Activating or deactivating the Fixed

Dialling Number function

• Press [Menu] →

→ Call

Setting the Service Dialling

Numbers

Settings → Hands-free Setting

Select Voice Call or Video Call

and press O.

Open the Fixed Dialling Number

display.

• Press [Menu] →

Settings → Fixed Dialling

Number

→ Call

You can select from a default list of

provided services (phone numbers)

that are encoded on the SIM/USIM

card.

Tip: You can access the service centre

from the Standby display by pressing

and holding 1.

Select ON and press O.

Note: If the Silent, Car, or Meeting Profile is

set (see p. 108), you cannot activate

the Hands-free setting.

Select ON or OFF and press O.

Enter the PIN2 if prompted.

Cancelling display of the answer

phone icon

Open the Service Dialling Numbers

display.

Note: If no Fixed Dialling Numbers are

registered on the SIM/USIM card, this

function is not available.

Open the Play Answer Phone

display, select Hide Answer Phone

Icon, and press O.

• Press [Menu] →

→ Call

Settings → Service Dialling

Numbers

Select Yes and press O.

Select the desired service and

press t.

• To release the setting, select No.

132

133

Settings

Setting an image to send

Setting whether your voice is sent

or not

under the Call settings section. (See p.

129.)

Video calls

Open the Image Settings display.

• Press [Menu] → → Video

Open the Voice Setting display.

• Press [Menu] → → Video

Setting the method to switch a

video call to a voice call

Open the Auto Answer display.

• Press [Menu] → → Video

Call Settings → Image Settings

Select an image setting option and

press O.

Call Settings → Voice Setting

If you have made a video call to a

person whose phone does not have

the function, you must switch to a

voice call. You can set the switching

method to automatic or manual.

Call Settings → Auto Answer

Press [List], select New and press

Select an option and press O.

Image Priority: Changes the image

quality based on transmis-

sion options, High Speed,

Normal or High Quality.

Send Own Image: Specifies if your

own image is sent to

ON:

Sends your voice to the

other party.

You can copy phone numbers from

the Call History, Address Book, and

so on, by pressing [Options] and

selecting Get number. Use the

navigation keys and O to select.

When you finished selecting a

number, a list of the registered Auto

Answer numbers appears.

OFF:

Cancels sending your voice

to the other party.

Open the Reconnection Method

display.

Setting the Auto Answer for a video

call

• Press [Menu] →

Call Settings → Reconnection

Method

→ Video

callers.

Alternate Video: Sets the alternative

video to send instead of

your own image.

This function (available only with the

use of a headset) enables you to

receive video calls without touching

any keys after the preset ringing time.

Registering callers’ numbers is

required before activating this function.

For setting the Auto Answer for the

voice call function, refer to “Setting the

Auto Answer (Voice Call Auto Answer)”

Select Auto or Manual and press

Confirm the phone number is in the

list and press [Done].

Select ON and press O.

• If you select Manual, you will be

asked if you want to switch to a

voice call. If you select Auto the

call is automatically switched to a

voice call.

134

135

Settings

Select Auto Answer Tone pattern

icon or Answer Time icon

and press O to set each item.

Press [Set] to complete the setting.

Adjusting the backlight level during

a video call

This function enables you to adjust the

brightness of the backlight to normal

(the default value) or minimum.

Using camera functions during a

video call

Open the Backlight display.

Calendar

• Press [Menu] →

→ Video

These functions enable you to zoom

the subject and switch the camera

between the front and the back during

a video call. You can also set them

before making a video call.

Call Settings → Backlight

Select Minimum or Normal for the

brightness and press O.

Open the Camera Settings display.

• Press [Menu] → → Video

Call Settings → Camera

Settings

Select Zoom or Switch Camera

and press O.

Zoom:

Enlarge or Normal

Switch Camera: Front or Back

136

137

Calendar

The phone comes with a calendar that

enables you to organize information by

month, week and day. You can attach

selected photo or video data to

particular dates manually to assist in

remembering the corresponding item.

You can manage your appointments

by making Schedule entries for chosen

days, and assign an alarm for each

entry so the alarm sounds at the set

time and date. Up to 100 Schedule

entries, 100 To Do tasks and 10 Notes

can be registered in the Calendar.

: Means you have a To Do task on

the day.

: Means you have a Schedule entry

on the day.

: Means you have another thing to

be aware of on the day.

Opening or editing Schedule entries,

Notes, or To Do tasks

Schedule

Open an entry on the daily calendar

display.

Creating a new Schedule entry

In Standby mode, press [Menu],

highlight and press O. The

Press [Options], select Edit and

press O.

monthly calendar appears.

Press [Options], select Schedule

List and press O.

Press [Options], select New and

press O. A new Schedule entry

screen appears.

Select an item and press O.

Enter or edit the information and

press O to finish each item.

Press [Save].

Highlight the day and press O and

the daily calendar is displayed.

Opening the weekly calendar

Note: To create a new Schedule entry or To

• Press [Options] on the monthly

calendar display, select Week View

and press O.

• To go back to the monthly calendar,

press [Options], then select Month

View and press O.

Enter information under the items

described below. Press [Save] after

you finish entering the desired

information.

Do task, see p. 139 or p. 143.

Icons used in the Calendar

Opening the Monthly calendar and

viewing a day’s schedule

Note

Birthday

Task completed

Task uncompleted

Task expired but uncompleted

In Standby mode, press [Menu],

highlight and press O.

Opening the daily calendar

Select the day for which you want to

see detailed information on the weekly

calendar or monthly calendar displays

and press O. The daily calendar

appears.

The monthly calendar appears. The

following icons are displayed beside

the day.

138

139

Calendar

Schedule items

URL: Enters the URL.

Details: Enters the content of the

entry.

Image: Pastes an image from the

Media Album.

web sites. Make sure there is a space

before or after the phone number and

email address when using other

characters in the same field.

Select a URL and press O.

Press [Yes].

Start date/time,

End date/

time: Use u / d or the

numeric keys to enter the

date/time.

Synchronising your Schedule entries

with those on a network server or

computer

Private: Indicates Privacy Mode is

ON or OFF.

Making a voice call or a video call

Repeat: Sets the repeating

pattern for the Schedule

entry; Every Day, Every

Week, Every Month,

Every Year, or OFF.

Category: Sets the category icon

chosen from the category

icon list.

Title: Enters a summary of the

entry.

Place: Enters the location of the

entry.

Alarm: Activates/Deactivates the

alarm by selecting ON or

OFF. Sets time/date, alarm

tone, alarm tone volume,

alarm image, vibration ON/

OFF and alarm priority.

Select an entry in the Schedule list

or open a Schedule entry.

Open the Schedule list, press

[Options], select Synchronise and

press O.

Refer to the procedures in

Connectivity (see p. 181).

Press [Options], select Call and

press O. A list of phone numbers

registered in the selected Schedule

entry appears.

Opening a Schedule entry

Open the monthly calendar, the

weekly calendar or the daily

calendar.

Press [Options], select Schedule

List and press O.

Select the number you want to call

Copying a Schedule entry to the

Media Album

and press

to make a voice call

or press

Select an entry in the Schedule list

and press [Options].

Select Copy to Media Album and

press O.

Select Copy, Copy Multiple, or

Copy All and press O.

Follow the on-screen instructions.

Select an entry and press O. The

entry display appears.

Accessing a web site

Select an entry in the Schedule list

or open a Schedule entry which

contains a URL address.

Operation Options

If you store phone numbers, message

addresses and URLs in Schedule

entries, you can use them to make

calls, create messages addressed for

the specified destinations, and access

Press [Options], select URL and

press O. A list of URLs registered

in the selected Schedule entry

appears.

140

141

Calendar

Registering a Schedule entry in the

Address Book

Deleting Schedule entries

Task items

To Do List

Select an entry in the Schedule list.

Press [Options], select Delete and

press O.

Title: Enters a title of the task.

Content: Enters the content of the

task.

Category: Sets the category icon

chosen from the category

icon list.

Due Date: Enters the due date.

Alarm: Sets alarm, melody or

vibration or no notification.

Repeat: Sets cycle, term, times

and expected days for the

task

Select an entry in the Schedule list

or open a Schedule entry.

This function enables you to manage

tasks. Once you register a task with a

due time, the To Do system automati-

cally categorizes it with one of the

labels “Completed”, “Uncompleted”,

and “Expired & Uncomplete” based on

how you have set up the To Do List.

Press [Options], select Save to

Address Book and press O.

Select Phone Number, Email

Address, or URL and press O.

Follow the on-screen instructions.

Select Delete, Delete Multiple,

Delete All, or Delete until

Yesterday and press O.

Displaying images in the Schedule

entries

Transmitting a Schedule entry to

another phone, PC or other device

Open the Schedule list, press

[Options], select Settings and

press O.

Creating a new To Do task

In Standby mode, press [Menu],

highlight and press O. The

Select an entry in the Schedule list

or open a Schedule entry.

Press [Options], select Send

vCalendar and press O.

Select Attach to Message, Send

via Infrared, or Send via

Select Image Display and press

Select ON and press O.

Status: Shows the current

status of the task to the set

due date; Completed,

Uncompleted, Expired &

Uncomplete.

monthly calendar appears.

Press [Options], select ToDo List

and press O.

Press [Options], select New and

press O.

Enter information under the items

described below. Press [Save] after

you finish entering the desired

information.

Bluetooth and press O.

Completion Date: Enters the task

completed date.

Private: Sets Privacy Mode ON/

OFF.

142

143

Calendar

Opening the To Do list

Editing tasks

In Standby mode, press [Menu],

highlight and press O. The

monthly calendar appears.

Press [Options], select ToDo List

and press O.

Open the To Do list display, select

the category you want to display,

select the task you want to edit and

press O.

Press [Options], select Edit and

press O.

Select the desired item from the list

and edit.

Press [Save] after you finish

entering information.

Extras

You can change the displays of the

different categories All Data, Expired,

Uncompleted, and Completed by

pressing l / r.

All Data: Displays all the tasks

registered on the To Do list.

Expired: Displays tasks which have

yet to be done and have

already passed their due

date.

Uncompleted: Displays tasks which

have yet to be completed

and are still due.

Completed: Displays tasks which have

been completed already.

144

145

Extras

Select ON and press O to set the

alarm clock. The entry display

shown below appears.

• To deactivate the alarm clock

temporarily, select OFF.

Vibration: Selects a vibration

pattern and its strength,

High, Medium, or Low.

Alarm Priority: Puts a priority on

Alarm or Profiles. If Profiles

is selected, only the

Specifying the time to sound

Alarm clock

Select ON Fixed Sound at the

Snooze mode setting display and

press O.

In addition to the alarm clock, this

phone has a convenient feature called

“Snooze mode”, which sounds an

alarm every specified number of

minutes (1 to 5) up to six times after

the first alarm is turned off. You can

set up to 8 Alarm Clock entries. Each

entry can be allocated a customised

Alarm sound or vibration, image, and

repetition pattern.

Enters the time and press O.

Alarm name: Enters a name.

Alarm time: Enters an alarm time.

Repeat: Selects Every Day, Mon

– Fri, Mon - Sat, Except

Days Off, Set Day of the

Week or No Repeat.

"Snooze mode" setting: (See p.

147.)

Alarm Tone: Selects a sound.

Alarm Tone Volume: Adjusts the

alarm sound volume.

Alarm Image (image displayed

when the Alarm goes off):

Selects an image from the

preset images or images in

the Media Album.

vibrator operates in place

of the alarm sound. It is

available only when Profiles

is set to silent.

Setting the sound pattern

You can allocate sounds to the six

alarm tones individually by selecting

sounds from the Media Album.

Select an item and press O.

Edit the item and press O.

Press [Save] to save the setting.

Select ON Selected Sound at the

Snooze mode setting display and

press O. The six alarm tone entries

appear.

Setting the alarm clock

In Standby mode, press [Menu],

highlight and press O.

Setting the alarm for the time you

have specified every minute

(Snooze mode)

Select one of the six alarm tones

and press O.

Select a sound from the Media

Album folder or another folder and

press O.

Select Alarm Clock and press O.

A list of 8 empty entries appears.

• When an entry has already been

stored, its set time and repetition

pattern are displayed.

Opening Snooze mode setting display.

Open an Alarm Clock entry.

Select

(Snooze mode setting)

and press O.

Select an entry and press O.

146

147

Extras

Repeat the procedure until sounds

have been selected for all the

entries.

Press [Set] to finish the setting.

Enter the Snooze Time and press

[Set].

Resetting Alarm Clock entries

Select Calculator and press O.

The initial display of the calculator

appears.

Voice Recorder

In Standby mode, press [Menu],

highlight and press O.

You can record voice sounds up to the

total storage capacity of the phone’s

Media Album and SD Card. If a SD

Card is inserted, the voice sound is

automatically recorded onto that card.

Perform your calculation.

Select Alarm Clock and press O.

A list of eight Alarm Clock entries

appears.

Press

0 to 9 Enters the numerals 0 to 9.

Description

Press [Save] to save the setting.

;

Enters a decimal point.

Performs a calculation.

Select the entry you want to reset

to empty and press [Reset].

Clears the entered numbers/Clears

all calculator data.

Turning off the Snooze mode setting

[C/AC]

Recording your voice

• Select OFF at the Snooze mode

(Addition)

In Standby mode, press [Menu],

highlight and press O.

setting display and press O.

Calculator

(Subtraction)

× (Multiplication)

Select Voice Recorder, press O.

Select Record and press O. The

phone is now in Voice Recorder

mode.

When the set time arrives

You can perform the addition,

subtraction, multiplication, and division

on numbers consisting of up to 10

digits.

÷ (Division)

Press y to return to the Standby

display.

The alarm sounds for up to 60

seconds. Press [Stop] or any other key

to silence the alarm.

Press [Record] to start recording.

Press [Stop] to stop the recording.

Notes: • The calculator can display up to

10 digits.

•

The alarm sound stops and the phone

goes into Snooze Mode (if it is set).

Note: If an incoming call or an alarm is

detected while you are using the

• If the result of a calculation is

more than “9,999,999,999” or less

than “-9,999,999,999”, “E” is

shown at the right end of the

display. Press [C/AC] to clear.

• If the result of a calculation is

negative “-” appears to the left of

the number.

• Press and hold O to cancel the

Snooze mode.

• If you receive an incoming call during

Snooze Mode, the mode is

automatically cancelled.

calculator, the calculation is automatically

terminated without storing the result.

In Standby mode, press [Menu],

highlight and press O.

148

149

Extras

Setting the sensitivity of the

microphone

Convenient key operation during

playback

Select Notes and press O, then

select Note and press O.

Notes

Select an unregistered item and

press [Options], then select Edit.

Enter characters as desired and

press O then select the category

icon from the list and press O.

Sound volume control up/down: Press

u / d.

Fast-forward: Press and hold r.

Rewind: Press and hold l.

This function enables you to use the

phone as a notepad. Up to 10 note

entries each of up to 256 bytes can be

stored. You can link an entry to a

specified day in the Calendar. Once

The sensitivity of the microphone can

be adjusted for recording your voice or

the voices of people further away,

such as on stage or on conference

speakers.

they are linked, an icon

is attached

to the day on the Calendar display, so

that you can easily check what you

have to do on the day.

Opening a Note entry

Press [Options] in the Voice

Recorder mode.

Select For Conference or For

Dictation and press O.

Open the list of Notes.

• Press [Menu] →

Note

→ Notes →

Creating a Note entry

Select a Note entry and press O.

Playing back voice data

Note entries can be registered with

category icons added to them. There

are over 40 kinds of category icons,

Editing a Note entry

In Standby mode, press [Menu],

highlight and press O.

Open the list of Notes.

• Press [Menu] →

Note

→ Notes →

including

School,

etc.

Work,

Holiday,

Private,

Meeting,

Select Voice Recorder, press O.

Select Play and press O to go to

the Melody & Ringtones folder in

the Media Album.

Select a Note entry, press

[Options], then select Edit and

press O.

In Standby mode, press [Menu],

highlight and press O.

Select a compatible sound file and

press O to play the file.

Edit the entry and press O. A list of

category icons appears.

Select an icon and press O.

150

151

Extras

Using the Call Note

Select a video (audio) file from the

All Videos (All Audios) folder or a

Playlist folder of your own making

and press O. (See p. 155 for

making a Playlist.)

World Clock

Media Player

Storing the phone number during a

call

•

With the Media Player you can play

compatible audio or video files,

create playlists, skip to other songs

or videos and so on. Media Player is

easy to use, and the controls are

similar to the buttons on a compact

disc player. You can also send video

or audio files via Picture Messages

or Email.

You can display the time of an

available world city. There are 36 major

cities to choose from.

Enter the number using the

numeric keys during a call and

press O.

Displaying the World Clock

Select Call Note, and press O.

The phone number is stored and

you can continue talking.

In Standby mode, press [Menu],

highlight , press O.

Select World Clock and press O.

The World Clock display appears.

• Use l / r to select the city for

which you want to display the

time.

Retrieving the Dial Note after the call

Options

In Standby mode, press [Menu],

highlight and press O.

Playing a video or audio file

• This display is referred to as the

“Play Video mode” or “Play Audio

mode” in this guide.

From the Standby display, press

[Menu] highlight and press O,

Select Notes, press O, select Call

Note, and press O. Stored Call

Note numbers appear in the

• Press [DST] for daylight saving

time.

select Media Player, and then

press O.

display. Select the desired number.

Press y after your finished.

Select Play Video (or Play Audio)

and press O.

152

153

Extras

Icons Used

Play

Skipping to the next file or going back

to the previous file

Playing files randomly

Using Playlists

Press [Options] while playing in

Play Video (Audio) mode, select

Play Settings, and then press O.

Select Random Playback, select

ON, and then press O.

The All Videos (All Audios) folder in the

Video Playlist (Audio Playlist) is

automatically created by default. You

can create your own Playlists with files

included in the order you desire.

• Press ; / n.

Pause

Random Play

Forwarding or rewinding a file

Repeat

• Press and hold l / r while playing

the file.

Repeat All

Change the display size available

using the 0 key

Creating a new Playlist

Sending a video (audio) file

Playing one file or all files repeat-

edly

Open the Media Player.

You can send a video (audio) file

attached to a Picture Message or

Email message (See p. 72.). You can

also use the Bluetooth function (See p.

169) or Infrared function (See p. 177.)

to send a file.

Original size display is set

Large size display is set

• Press [Menu] →

Player

→ Media

Press [Options] while playing in the

Play Video (Audio) mode, select

Play Settings, and then press O.

Select Repeat Playback, select

Repeat or Repeat All, and then

press O.

Select Play Video (or Play Audio)

and press O.

Playing or pausing a file

Press [Options], select New, and

then press O. Give the Playlist a

name and press O. The Video

(Audio) file selection display

appears.

• Press O. (

for Play or

for

Pause)

Stopping a file

• Press

Select a file you want to include in

your new Playlist, and press O.

The selected file is placed in the

first line.

Adjusting the volume

• Press u / d.

154

155

Extras

Press [Next] to go back to the

Video (Audio) file selection display

to choose another file.

Select the next file and press O.

The selected file is added to the

second line.

Repeat this step for all the files you

want to add to the Playlist.

Press [Complete] to finish creating

the new Playlist.

Editing a Playlist

Streaming audio and video

Keeping the backlight illuminated while

streaming

You can add or insert a file into a

Playlist, or change the file order in a

Playlist.

The S750i enables you to receive a

continuous stream of music or video

by connecting to a streaming site on

the web. Using streaming technology,

you can instantly listen to audio files or

view video files without having to

download the entire file.

The phone is set to illuminate the

backlight for a certain time after there

are no key presses by default.

Open the Media Player.

• Press [Menu] →

Player

→ Media

Select Light in Player Settings and

press O.

Select Always ON and press O.

Select Play Video (or Play Audio)

and press O.

Key operations while streaming audio/

video

Select the Playlist you want to edit

and, press [Options], select Edit

and press O. Highlight the desired

file and press [Options], then select

the desired operation from the list

and press O.

Changing the Media Player’s skin while

streaming

• To adjust the volume, press u / d.

• To play or pause a file, press O (

Select Skins in Player Settings and

press O.

for Play

for Pause).

Press [Prev.] or [Next] to preview

the Skin, and then press O to set.

Player Settings

Opening Player Settings

Open the Media Player.

• Press [Menu] →

→ Media

Player

Select Player Settings and press

156

157

Extras

Opening the SIM Toolkit

Using the Help guide

This phone’s on-screen Help enables

you to quickly confirm key operations

for various functions.

You can access the SIM toolkit menu if

your SIM/USIM card supports this

additional service. Menu names and

contents vary depending on the SIM/

USIM card you purchase. Contact

your mobile phone stockist for details.

Open the Help display.

Orange World

• Press [Menu] →

→ Help

Select a function by scrolling with

u / d.

Open the SIM Toolkit display.

• Press [Menu] →

Toolkit

→ USIM

Displaying the call time

Select the desired menu and follow

the instructions.

See page 12.

158

159

Orange World

Using bookmarks

Using web pages saved in the

Saved Page folder

Browser Settings

See p. 121.

Web browsing

The phone enables you to save URLs

in the Bookmarks folder within the

Media Album, and attach bookmarks

to messages as well as manage them,

for example, editing or moving them to

different folders.

You can access web pages and

update them from the Saved Page

folder.

Accessing WAP sites on the

Internet

In Standby mode, press [Menu],

highlight and press O.

Opening the Saved Page folder in the

Media Album

Select the desired WAP site from

the Bookmarks list.

Opening the Bookmarks folder from

the Media Album

In Standby mode, press [Menu],

highlight and press O. A list of

• While browsing pages, use u / d to

scroll up or down, and O to select

an item to execute the command.

Press B to return to the previous

display.

In Standby mode, press [Menu],

highlight and press O. A list of

folders appears.

Select Saved Page and press O.

folders appears.

Select the Bookmarks folder and

press O.

Accessing a web page from the Saved

Page folder

Open the Saved Page folder

display.

Select the web page you want to

access and press O.

Web based help

Accessing a web site from the

Bookmarks display

• To view instructions etc. on how to

use your phone, from the Standby

display select

Open the Bookmarks display.

Select a bookmark and press O.

→ Help

160

161

Games

162

163

Games

Your phone enables you to play

Downloading Java™ applications

from Orange World

Volume Setting: Select the level using

u / d and press O.

Vibration Setting: Select ON or OFF

and press O.

Java ™ Settings

various preset, downloadable, WAP

and text based games. Open Games

from the main menu to start saved

applications (Java™ Games), play

WAP or text games or download new

applications (More Games), or define

the settings (Java™ Settings).

Opening the Java™ Settings

In Standby mode, press [Menu],

highlight and press O.

In Standby mode, press [Menu],

highlight and press O.

Select More Games and press O.

Press [Yes] to connect to Orange

World and download the desired

Java™ application by following the

on-screen instructions.

Setting the backlight and blinking

pattern

Select Java™ Settings and press

You can set the backlight to always be

ON or OFF from the Light settings. You

can also define whether to enable or

disable the backlight control as

programmed in some Java™

applications from the Flash Control

settings.

Setting the play volume and

vibration

Playing Java™ games

You can start Java™ games from the

Games application list (Preset and

downloaded applications) or by

accessing Orange World.

Deleting applications

You can adjust the play volume of the

Java application to one of 5 levels or

set it to OFF. You can also set whether

or not to vibrate the phone as

programmed in some Java applica-

tions.

Open Java™ Games, select the

application you wish to delete, and

then press [Options].

Select Delete, press O and then

confirm you want to delete by

pressing [Yes].

Starting from the application list

Open Java™ Settings, select

Light and press O.

In Standby mode, press [Menu],

highlight and press O.

Select Java™ Games and press

Select ON/OFF and press O.

Select from the following options.

Open Java™ Settings, select Play

Volume/Vibration and press O.

Select Volume Setting or

Notes: • Maximum of 50 games can be

stored in memory (including preset

games).

Select an application and press O

Vibration Setting and press O.

• Preset games cannot be deleted.

to start.

164

165

Games

Always ON: Turns on the backlight

while a Java™ application is

running.

Always OFF: Turns off the backlight

while a Java™ application is

running.

Normal: Lights when a key is pressed

for the duration set in the Key

Light setting in the Light

setting menu (See p. 110).

Re-setting all Java™ Settings or

Deleting all Java™ applications

Open Java™ Settings, select

Delete Java™ Settings and press

Select Reset Settings or Clear All

Memory and press O. Enter your

password when asked.

Connectivity

Reset Settings: Resets all the Java™

settings. Saved data is not

delated.

Clear All Memory: Deletes all the

Java™ applications saved

in Java™ Games except

the pre-installed applica-

tions.

After completing ON/OFF Setting in

step 2, the display returns to the

Light settings. Select Flash

Control and press O.

Select ON or OFF and press O.

ON:

Enables a Java™ applica-

tion to control flashing of

the backlight.

OFF:

Disables a Java™

application from controlling

flashing of the backlight.

166

167

Connectivity

Bluetooth^®transmission

Table 1

automatically and provides easy

connection to another Bluetooth

enabled device such as a headset or

PC.

Activate Bluetooth reception mode

on the receiving device.

• When using an S750i as the

other device:

On the other S750i, press and

hold O.

Transmittable/

Exchangeable Content

Format

Bluetooth is a radio technology that

enables you to use a wireless

Owner Information (Electronic

Business Cards), Address

Book

vCard

connection to send or exchange data

such as indicated in Table 1. The

phone detects all Bluetooth compat-

ible devices that are turned on and set

to transmittable within a maximum

range of 10 metres and displays a list

of them on the screen when search is

used. However, transmissions must be

performed one device at a time. For

additional information, download and

view the Bluetooth Setup Guide from

the ‘Service’ → ‘Downloads’ section

at http://www.sanyo-mobile.com.

• Press and hold O from the Standby

vNote

Entries in the Notes

To Do tasks

display. Make sure

appears in the

Open Media Album folder on your

S750i.

vTo Do

vCalendar

Schedule events

phone’s display (see p. 176). If you

press and hold O again, Bluetooth

mode is switched off.

• Press [Menu] →

→ Picture,

To send data, on the receiving device

activate the Bluetooth data reception

mode (refer to your receiving device’s

manual).

Video List, Melody & Ringtones

or Documents → O

Select a data item to send and

press [Options].

Select Send and press O.

Select Send via Bluetooth and

press O.

Select Send → [Yes] → [Search]

Select a connectable device and

press O.

• If the other device is not saved in

your Connection List (your list of

registered devices. see p. 176)

and Bluetooth Password

authentication (see p. 178) is

required, you will be prompted to

Notes: • This setting remains in effect after

the phone is turned off and on

again.

• While the phone is in Bluetooth

mode power consumption is greater

than when it is not.

Note: No incoming calls or messages can

be received during Bluetooth

transmission. Data protected by

transmitted or exchanged.

Sending data via Bluetooth from the

Media Album

Switching the Bluetooth mode on or

off

Note that you must first move your SD

Card data to your phone’s memory

before performing the following.

Switching the Bluetooth mode on

enables your S750i to receive data via

Bluetooth from a paired device

168

169

Connectivity

save the other device in the list.

Press [Yes] if you want to do so.

The device is registered after

Bluetooth Password authentica-

tion is completed.

To complete Bluetooth Password

authentication, enter any desired

number between 1 and 8 digits

(See p. 178) and press O.

• When using another S750i as the

other receiving device:

Press [Yes] to save your S750i in

the Connection List on the other

S750i.

• The timing of being prompted for

the Bluetooth Password may

differ depending on the device

you are connecting with.

Sending vCard, vNote, vToDo or

vCalendar via Bluetooth

→ Send vCard → Send via

Bluetooth

• To send a vCard

Bluetooth from the Media Album.”

see p. 169.)

You can send Address Book or Owner

Information data or others to another

Bluetooth device. Activate Bluetooth

reception mode on the receiving

Step1 → Send → [Yes]

Sending a To Do task (vToDo)

• To send multiple vCards

Step1 → Send Multiple →

Check desired entries and press

O → Repeat the same steps for

multiple items → [OK] → [Yes] →

[Search] to search the device

Follow the instructions on the

display. (Refer to procedures from

step 6 of “Sending data via

Bluetooth from the Media Album.”

see p. 169.)

Press [Menu] →

→ [Options]

→ ToDo List → Select a ToDo task

→ [Options] → Send vToDo →

Send via Bluetooth → Send or

Send Multiple

Follow the instructions on the

display. (Refer to procedures from

step 6 of “Sending data via

Bluetooth from the Media Album.”

see p. 169.)

device before you start sending data.

Sending Owner Information data

(vCard)

Press [Menu] →

→ Owner

Information → [Options] → Send

vCard → Send via Bluetooth

Follow the instructions on the

display. (Refer to procedures from

step 6 of “Sending data via

Bluetooth from the Media Album.”

see p. 169.)

Sending a schedule event (vCalendar)

Sending a Note (vNote)

Press [Menu] →

→ [Options]

Press [Menu] →

→ Notes →

→ Schedule List → Select a

schedule event → [Options] →

Send vCalendar → Send via

Bluetooth → Send or Send

Multiple

Save the data on the other

receiving device.

• When using an S750i as the

other receiving device:

Note → [Options] → Send vNote

→ Send via Bluetooth → Send or

Send Multiple

Follow the instructions on the

display. (Refer to procedures from

step 6 of “Sending data via

Sending Address Book information

(vCard)

Press [Menu] →

→ Contacts

Select Save and press O.

Follow the instructions on the

display. (Refer to procedures from

List → Select an entry → [Options]

170

171

Connectivity

Note: While your S750i is in Bluetooth

mode and the other device has been

registered in your Connection List,

your Owner Information will be

automatically sent if requested by a

registered device.

occur quickly.

step 6 of “Sending data via

Bluetooth from the Media Album.”

see p. 169.)

PC (Bluetooth enabled)

• Do not press any keys while data is being

exchanged or disconnection of

transmission may occur.

On the PC's display, enter your

Bluetooth Password (Must match

the S750i you are connecting with)

after the authentication prompt for

connection with your S750i

appears.

Receiving data

Using the Bluetooth headset

You must switch the Bluetooth mode

on to receive data from another device.

The Bluetooth headset can be

wirelessly connected to the phone,

and allows you to make and receive a

call handsfree. Read your Bluetooth

headset user manual before using. For

additional information, download and

view the Bluetooth Headset Guide

from the ‘Service’ → ‘Downloads’

section at http://www.sanyo-

Your S750i

Select the owner information and

begin the exchange.

Press O

→

Bluetooth

→

• To switch the Bluetooth mode on,

press and hold O. Make sure

appears in the phone’s display. Save

the data when the transmission is

finished.

Exchange Owner Info

Press [Search].

Note: Refer to your PC's user guide for

Select the PC device and press O.

Once prompted to save to the

Connection List, press [Yes].

Enter a Bluetooth Password (Must

match the PC you are connecting

with) and press O if you have not

already saved it in the Connection

List.

Refer to steps 1 and 2 below for

PC side operations.

Select Save and press O to save

the data received from the PC on

your S750i.

details on Bluetooth operations.

Regarding other generic Bluetooth devices

such as mobile phones:

Exchanging Owner Information

mobile.com.

•

You may be required to save your S750i in

the connection list on the other device.

Enter the Bluetooth Password if prompted.

• The timing of being prompted to save

your S750i in the connection list and save

the owner information on the other device

may be different depending on the device.

• For smooth operation you may need to

respond quickly to another device's

Bluetooth Password prompt as the

You can send and receive Owner

Information data between your phone

and another PC, PDA or mobile phone.

The following example indicates an

exchange between your S750i and a

PC. The initiator is your S750i.

You must activate Bluetooth mode on

your PC before performing the

following.

Configure both devices

Activate the Bluetooth pairing

mode on the Bluetooth headset.

On your S750i, press O →

Bluetooth → Connect to Hands-

free

Press [Search].

Bluetooth timeout of that device may

172

173

Connectivity

Select the Bluetooth headset and

press O.

Enter the Bluetooth Password

written in your headset’s user

guide.

Disconnecting the connection

Connecting the phone and your

laptop PC to use the Internet

For further instructions, refer to the

Modem Setup Guide from the

You can disconnect the already

established connection.

‘Service’

→

‘Downloads’ section at

You can use the Internet anywhere as

long as you have your phone and a

portable laptop PC. This function

enables the phone to work as a

modem for the PC connecting them

together via Bluetooth. You can also

use the USB cable (included) to

connect to the Internet. For additional

information, download and view the

Modem Setup Guide from the ‘Service’

→ ‘Downloads’ section at http://

www.sanyo-mobile.com.

http://www.sanyo-mobile.com

On the S750i, press O →

Bluetooth → Disconnect Hands-

free

Transferring data on your phone to

a Bluetooth compatible PC and vice

versa

Activating the Bluetooth hands-free

mode on your S750i

Note: If your headset is moved far enough

out of range from the S750i to cause

a disconnection, reconnection is

automatic given the following

conditions.

• Press and hold O from the Standby

display.

You can transfer data from your

phone’s Media Album to your PC and

vice versa.

Or press O from the Standby

display and select Bluetooth →

Switch Bluetooth ON

1) Your S750i is in Bluetooth mode.

2) You (and your headset) move back

into the connectable range.

Pair your phone with your

Bluetooth compatible PC.

Use your PC’s Bluetooth software

to initialise the data transfer or

perform the transfer from your

phone.

Now, your S750i is ready tos be

automatically discovered and con-

nected with the hands-free kit /headset.

In some cases, you may need to be

immediately next to the handset in

order to reconnect. If reconnection of

your headset with the S750i does not

occur automatically, you must initiate

connection from the headset. For

details refer to your headset’s user

guide.

Activate the Bluetooth mode on

your Bluetooth compatible PC or

Bluetooth USB/Card adaptor, etc.

Note: To turn off Bluetooth mode, press

and hold O again.

Note: Before using, refer to the user guide

Note: Refer to your PC’s Bluetooth software

of your Bluetooth USB/Card or PC.

user's guide for more information.

Press and hold O from the

Standby display on your S750i to

activate the Bluetooth mode.

174

175

Connectivity

Bluetooth settings

Displaying the address ID of registered

devices

Protecting registered devices from

deletion

Select an entry, press [Options].

Select Delete and press O.

Select Delete, Delete Multiple, or

Delete All and press O.

• To delete multiple items, select

the desired and press O →

Repeat the same steps for

multiple items → [OK] → [Yes]

• To delete all items, enter the

security code when prompted →

[Yes]

Open the Bluetooth Settings

display.

Select Connection List from the

Bluetooth Settings display and

press O. A list of registered

devices appears.

Select Connection List from the

Bluetooth Settings display and

press O. A list of registered

devices appears.

• Press O → Bluetooth →

Bluetooth Settings

Select an entry, press [Options],

select Device Address and press

Press [Options], select Protect/

Unprotect and press O.

Select the entry you want to

protect and press O. A key icon

appears to the left of the entry.

Repeat for all those you want to

protect.

Keeping your S750i from being

detected by another Bluetooth

enabled device

• For registering devices in the

Connection List, see step 7 on p.

169.

This function enables your S750i (while

in the Bluetooth mode) to be undetect-

able by another Bluetooth device. This

feature is useful to prevent unwanted

connections from an unknown device.

Setting the period to search for

connectable devices

Editing the names of registered

devices

• To apply the protection, press

[OK].

• To release the protection, select

the key icons, and press O, then

press [OK] to finish.

Select Search Time from the

Bluetooth Settings display and

press O.

Enter a time (10 to 30 seconds)

using u / d and press O.

Select Connection List from the

Bluetooth Settings display and

press O. A list of registered

devices appears.

Select Visibility from the Bluetooth

Settings display and press O.

Select Hidden and press O.

• To release the setting, select

Always Visible (the default) or

Visible for 3Min.

Deleting entries of registered devices

Select an entry, press [Options],

select Rename and press O.

Edit the name and press O.

Setting the Bluetooth Timeout for

connection

Select Connection List from the

Bluetooth Settings display and

press O. A list of registered

devices appears.

• While Visibility is set to Always

Visible or Visible for 3Min. in

the Bluetooth mode,

in the phone’s display.

You can change the Bluetooth

Timeout for connection. The Bluetooth

appears

176

177

Connectivity

to the other device. However this

may be different depending on the

device and device settings.

• No incoming calls or

messages can be received

during Infrared transmission.

Timeout setting does not affect the

duration of a Bluetooth connection

after it is established.

Confirming the detailed information in

the Bluetooth settings

• Select Check Setting on the

Bluetooth Settings display and press

O. The following information is

displayed: The name of your mobile

phone, the device address and the

current setting status in Authentica-

tion and supported services.

Editing your own Device Name

Infrared transmission is possible when:

• The two devices are turned on and

set to transmittable.

• Infrared ports are both facing each

other and are within a distance of at

least approx. half a metre or closer.

• There are no line of sight obstruc-

tions between the devices.

Turning off Bluetooth Password

authentication

Select Own Device Name from the

Bluetooth Settings display and

press O.

Edit the current name and press

Bluetooth Password authentication

requires you to enter a 1 to 8 digit

number of your own creation upon

each connection with another

Bluetooth compatible device, insuring

your phone and the other device are

authenticated each time upon

connection. However, if you wish to

skip this authentication step, you can

turn the setting off.

Changing the Authentication Password

Infrared transmission

Select Authentication Password

on the Bluetooth Settings display

and press O.

Select Change and press O.

Enter the handset’s security code.

Enter a new authentication

password.

Sending Media Album folders

Infrared is a wireless infrared transmis-

sion system to transfer data on your

phone with another device with a built

in infrared port. Infrared technology

enables your phone to send and

receive contacts, your phone’s

information (Owner Information),

calendar events, To Do tasks, pictures

and videos, etc.

Activate receiving mode on the

receiving device.

• When using an S750i as the

other device:

On the other S750i, press [Menu]

→ Connectivity →

Infrared → Receiving Mode →

Select Bluetooth Password From

the Bluetooth Settings display and

press O.

Press O.

→

Select OFF and press O.

Note: This authentication password is

different from the Bluetooth

Password.

[Yes]

Note: Even when this setting is Off, your

phone may be prompted to enter the

Bluetooth Password corresponding

Open the list of Media Album

folders on your S750i.

Cautions: • SD Card data cannot be

transmitted.

178

179

Connectivity

Press [Options], select Send via

Infrared and press O.

Select Send Folder, Send

Multiple Folders, or Send All and

press O.

• To send one folder, press [Yes].

• To send selected folders, select

the desired item and press O →

Repeat the same steps for

multiple items → [OK] → [Yes]

• To send all folders, enter the

handset’s security code and

press O. Enter the Authentica-

tion Password of the device you

are connecting to (See p. 181.)

→ [Yes] → Add or Overwrite

Select a data item and press O.

Press [Options], select Send and

press O.

Select Send via Infrared and press

Select Send, Send Multiple, or

Send All in Folder and press O.

Follow the instructions on the

display. (Refer to procedures

above.)

Address Book, Schedule, To Do,

Notes and Media Album appears.

Put a checkmark in the box next to

each category you want to send by

pressing O. After you have placed

a check mark for all of the desired

folders press [OK] to finish. Enter

the Authentication Password (See

p. 181.) and press [Yes].

Changing the authentication

password

Allows the sender to require the

authentication upon connection with

another device.

Open the Authentication Password

display.

• Press [Menu] →

→ Connec-

tivity → Infrared → Authentica-

tion Password

Receiving data (Receiving Mode)

Sending all data files from Settings

(Send All Mode)

Select Change and press O.

Enter the handset’s security code

and press O.

This function enables your phone to be

ready to receive data from another

device via infrared.

You can transmit categorised data in

the phone to another device via

Infrared.

Enter a new Authentication

Password.

Press O.

Open the Receiving Mode display.

• Press [Menu] → → Connec-

tivity → Infrared → Receiving

Sending data files from the Media

Album folder

Open the Send All Mode display.

• Press [Menu] → → Connec-

tivity → Infrared → Send All

Mode

Enter the handset’s security code

and press O.

A list of data categories such as

Mode

Activate receiving mode on the

receiving device. (See step 1 on p.

181.)

Open a list of Media Album folders

on your S750i.

Synchronising contacts or

To Do tasks

Press [Yes]. Now your S750i is

ready to receive data via Infrared.

Start the sending operation on the

other device.

You can exchange, update or replace

data in the Address Book, schedule

and To Do tasks between the phone

Save the data on your S750i.

Select a folder and press O.

180

181

Connectivity

and a network server or between the

phone and a computer.

Server URL: Displays the server URL.

User Name: Displays the user name.

Password: Displays the current

password.

Method: Displays the following

synchronisation methods.

Press [Start] and press [Yes] to

start synchronisation.

Method, Method, Selected Data,

Database (Address Book),

Database (Schedule), and

Database (To Do):. Select other

items and edit if desired.

• If you want to define a new

profile, select No items, press O

and enter each item.

• For an explanation of the above

items, see p. 182 “Synchronising

data between the phone and a

network server”.

• Communication Method: Select

Bluetooth, Infrared, or USB.

Press [Start] and press [Yes] to

start synchronisation.

Opening the Synchronise display

Synchronising data between the

phone and a computer

• Press [Menu] →

→ Connectiv-

ity → Synchronise

You can synchronise data on your

S750i with data on your PC. For

detailed instructions, view the

Synchronisation Setup Guide and

download the Sychronisation software

from the ‘Service’ → ‘Downloads’

section at http://www.sanyo-

mobile.com

• Mobile ↔ Server (Normal):

Only data that has been changed is

exchanged between the phone and

the server.

• Mobile → Server (Replace):

All data on the server is replaced

with the phone data.

Synchronising data between the

phone and a network server

Select Network on the Synchronise

display and press O.

Select a network profile and press

O. The items described below for

the current setting status appear.

Select an item and edit it if desired.

Note: You will need to install the S750i’s

USB driver before synchronising with

your PC using the USB cable.

Selected Data: Selects data in the

Address Book, schedule,

and To Do list.

Database (Address Book): Registers a

database name for

Address Book.

Database (Schedule): Registers a

database name for

Notes: • When you are indicating your

password and user name, both

must match on the phone and

your PC.

Notes: • If you want to define a new profile,

select No items and press O and

enter each item.

Select Local on the Synchronise

display and press O.

Select a local profile. The items of

the current setting status appear as

follows, Profile, User Name,

Password, Communication

• Using the synchronisation function

requires an additional service

subscription.

• To utilize this function, make sure

you are using Microsoft Outlook

on your PC. Outlook Express is

not supported.

schedule.

Database (To Do): Registers a

database name for To Do.

Profile:

Displays the profile name of

your Infrared system.

182

183

Connectivity

Setting a regular period for

synchronisation between the phone

and the network server

Standard Print: Prints each photo on

one sheet.

Index Print: Prints multiple thumbnail

photos on one sheet.

Printer Default: Prints the photo

according to the default

printer settings.

DPOF Print: Prints the indicated

photos (See p. 97).

In the Standby display, press

Select Copies, and press O. Use

the navigation keys to select the

number of copies and press O.

Select Print Size, select the

[Menu], select highlight

and

press O.

Select Connectivity and press O,

select Print Mode and press O,

then select Execute and press O.

Once the “Please connect to

printer” message is displayed

connect the USB cable (included)

to the phone and printer.

Select either Standard Print,

Index Print, or Printer Default.

Select Images to Print and press

Select Auto Synchronisation on

the Synchronise display, then ON

and press O.

desired print size and press O.

10 Select Date Print, select ON or

OFF and press O.

11 Press [Print].

Select an item with an icon, set the

starting time and select the period.

: Enters the time.

: Selects Every Day, Every Week,

Every Month or No Repeat.

Transmitting data on the SD

Card to a PC via USB

Printing from your digital photo

printer (Not included)

Notes: • Install the S750i USB driver that is

on the CD-ROM included in the

box at time of purchase. Read the

digital photo printer (not included)

manual before using.

<Select Profile>: Select from a profile

entry.

You can transmit all the SD Card data

from the phone to a PC through a

USB cable and edit the data from the

computer. Do not remove the USB

cable when using this function.

Note: Press [SD Card] if you want to select

data stored on the inserted Memory

Card.

Printing

• Make sure your battery is fully

charged before using this

function.

Select the folder where your

photo(s) are stored and press O,

then select the photo(s) to print and

press O.

You can print out photos stored on the

handset or Memory Card. Select from

Standard Print, Printer Default, Index

Print or DPOF Print.

Connect the phone to the PC with

a USB cable.

Select USB Storage Mode and

press O.

• Greyed out items cannot be

selected. Not all printer are

compatible, check your printer’s

user guide to confirm.

Press [OK] when you finished.

Press [Yes].

184

185

Connectivity

Note: For detailed instructions, view the

‘USB Storage Mode Guide’ from the

‘Service’ → ‘Downloads’ section at

http://www.sanyo-mobile.com

computers in which the S750i device

is not indicated in the task tray but it

is connected and being accessed.

Make sure the SD Card is not being

accessed before removing either the

USB cable or SD Card.

You will need to install the S750i’s

USB driver on your PC before using

the USB cable and this function.

• Do not remove the battery pack

while transferring data.

Cautions: • While the phone is in the USB

Storage Mode, no incoming

calls or messages can be

received.

Safety

• Do not use a computer to modify,

move, or add data on the SD Card.

• Ensure there is ample battery charge

remaining before using. Not doing so

may result in data errors or damage,

as well as possible problems with

your S750i.

• Use an SD Card that has been

formatted on your S750i. SD Cards

that have been formatted on a

computer etc. may not be recogniz-

able on your S750i.

• Only USB1.1 is available.

• Data may become corrupted if

you do not follow the proper

procedures or instructions

that appear as a dialog

Precautions

messages in the task tray.

Precautions when using the SD

Card and the USB Storage Mode

• Disconnecting the USB cable or

removing the SD Card while the SD

Card is being accessed may cause

serious damage to the SD Card,

S750i and computer. There may be

some cases on Windows Me/98SE

• Do not turn off the computer’s power

switch or change to the standby

mode when using USB Storage

Mode. Doing so may result in not

being able to perform data transfer

even after rebooting your computer.

186

187

Safety Precautions

Do not use near medical devices or

on board aircraft

• Do not hold the receiver near your

ear except during a call, as a

sudden sound from the ringing

speaker may result in damaging your

hearing.

• Should you use the phone orien-

tated with its back adjacent to your

body (e.g., when using the headset),

maintain a suitable distance

between phone and your body.

• Before boarding an aircraft, be sure

to first cancel Auto Power On and

any other alarm settings, and then

turn the phone off.

• To avoid traffic accidents, do not use

a mobile phone while driving. Park

the vehicle first and then use the

phone. Always secure the phone in

its holder; do not place the phone

on the passenger seat or where it

can become dislodged in a collision

or sudden stop.

• RF signals may affect improperly

installed or inadequately shielded

electronic systems in motor vehicles.

Check with the vehicle manufacturer

or representative regarding use.

• Do not make any changes or

modifications to your phone not

expressly approved.

• Do not use the phone in high

humidity or with wet hands to

prevent electric shock or short-

circuiting.

• Be careful not to drop or damage

the phone. Rough handling can

damage the internal circuit boards

causing malfunction.

• Keep the phone out of the reach of

small children. They could hurt

themselves or others.

Do not use a mobile phone near a

heart pacemaker or any other medical

device. Radio frequency (RF) signals

may interfere with the functionality of

medical or aircraft equipment.

• Always maintain a suitable distance

between the phone and a pace-

maker if the phone is switched ON.

• Turn OFF the phone immediately if

you have any reason to suspect that

interference is taking place.

• Turn OFF the phone in health care

facilities and request permission

before using the phone near medical

equipment.

• Consult the manufacturer of any

personal medical devices (such as

hearing aids) to determine if they are

adequately shielded from external

RF signals.

General Warnings

Notes • Use only in the normal position

(applied to ear). Do not touch or

hold the antenna unless absolutely

necessary.

When not to use in or around your

vehicle

• Do not use the phone outside on a

rainy day or near any source of

water.

• Do not leave the phone in extremely

hot or cold places, such as in a

closed or open car in summer or

winter conditions, or allow it to be

exposed to direct sunlight.

• Do not use your phone near

combustible fuels or flammable

chemicals.

• It is normal for the mobile phone

to become warm when used for

extended periods.

• The temperature near the phone

should be kept between 5°C and

35°C.

188

189

Safety Precautions

• Keep the metal contacts on the

phone and battery clean.

• Do not use harsh chemicals,

cleaning solvents, or strong

detergents to clean the phone.

Wipe it with a soft cloth. (Avoid

using a cloth which is too dry

because it may generate static

electricity.)

• Use only Sanyo approved

accessories and batteries. To

prevent fire or damage to the

phone, do not connect incompat-

ible products.

• You should also contact a repair

shop promptly if the phone is

dropped or damaged.

• To prevent the risk of fire or injury,

never attempt to repair the equip-

ment yourself.

• Do not dispose batteries in a fire.

• Do not charge or leave the batteries

in areas subject to high tempera-

tures (near a fire, heater etc.).

• Do not short-circuit the battery. Note

that short-circuiting could occur

accidentally if a metallic object (coin,

pen, jewellery, or similar) caused a

direct connection between the + and

- terminals of the battery.

When the battery is running out of

power, a warning sign is shown and a

tone may be heard.

Leaving the battery in hot or cold

places, such as in a closed or open

car in the heat of summer or the cold

of winter will reduce the capacity and

life of the battery.

The battery should be stored at a

temperature of between 5°C and

35°C.

Battery Safety Precautions

The S750i uses a lithium ion battery.

To avoid any risk or danger, you

should observe the following precau-

tions.

• Never use an AC adaptor or battery

which is damaged or worn out.

• Do not attempt to disassemble the

battery.

• If a home telephone, TV, or radio

is turned ON, keep the phone

away from it.

• Have your phone serviced only by

authorised personnel.

Battery Capacity

Talk time

Standby time

210 hours

170 minutes

(in UMTS area)

190 minutes

(in GSM area)

(in UMTS area)

180 hours

(in GSM area)

• Use only Sanyo approved batteries,

AC adaptors and accessories

recommended for use with this

specific model. Using other batteries

or AC adaptors may cause damage

and invalidate your warranty.

• Batteries should be recycled or

disposed of correctly. They should

not be disposed of in municipal

waste.

Battery Depletion Note:

If the phone is not going to be used for

an extended length of time, remove

the battery and store it in a dry place.

You may have to recharge the battery

if it has not been used for a long

period of time.

Solving Problems

• The longer the length of talk time,

the shorter the standby time is.

• The above talk and standby times

are the average times to be

expected under ideal receiving

conditions. Total operating time

depends on charge condition,

• If a problem occurs, you should turn

OFF the phone, remove the battery

and then contact your nearest

qualified repair shop.

190

191

Safety Precautions

temperature, signal strength and

function settings.

• If the phone is out of the coverage

area for a long period of time, even

in the Standby display, operating

time becomes shorter.

• If you leave the phone without

finishing operations such as PIN

(PUK) entry (see p. 126), the

Standby time may become shorter.

• Do not use accessories or AC

adaptors in areas subject to more

than minimal dust and vibrations.

• Do not use accessories or AC

adaptors near water.

Accessory and AC adaptor

Safety Precautions

Specific Absorption Rate

(SAR)

Your mobile phone has been designed

and manufactured not to exceed the

limits for exposure to electromagnetic

fields recommended by the Council of

the European Union. These limits are

part of comprehensive guidelines

developed by independent scientific

organisations through periodic and

thorough evaluation of scientific

studies. The guidelines include a

substantial safety margin designed to

assure the safety of the phone user

and others and to take into account

variations in age and health, individual

sensitivities and environmental

Warnings

• Use only Sanyo approved accesso-

ries and AC adaptors.

• Disconnect the AC adaptor or

accessories from the power source

when not in use.

Solving Problems

• If a problem occurs, you should turn

OFF the phone, remove the battery

and then contact your nearest

qualified repair shop.

• You should also contact a repair

shop promptly if the phone is

dropped or damaged.

• To prevent the risk of fire or injury,

never attempt to repair equipment

yourself.

• Connect the power plug to only a

100–240 VAC outlet.

Health warning

• Do not connect or disconnect the

power cord with wet hands.

• When disconnecting the power cord

of an accessory, grasp and pull the

plug, not the cord.

• If the battery leaks and the liquid

comes into contact with your eyes,

do not rub them but immediately

wash your eyes thoroughly with

clean water and then seek immedi-

ate medical attention. Battery liquid

can cause damage to your eyesight.

• If the battery leaks and the liquid

comes into contact with your skin,

immediately wash thoroughly with

clean water. Battery liquid can

damage your skin.

Cautions

conditions. European exposure

standards for mobile phones provide

for the amount of radio frequency

electromagnetic energy absorbed by

the body when using a mobile phone

to be measured by reference to the

Specific Absorption Rate (SAR).

• The temperature near accessories

and AC adaptors should be between

5°C and 35°C.

• The humidity near accessories and

AC adaptors should be between

35% and 85%.

192

193

Safety Precautions

The SAR limit recommended by the

Council of the European Union for

mobile phones used by the public is

2.0 watts/kilogram (W/kg) averaged

over 10 grams of body tissue. Your

mobile phone SAR value is 0.742

watts/kilogram (0.675 watts/kilograms

according to FCC requirements). Tests

have been performed to ensure that

this limit is not exceeded even when

the phone is operating at its highest

certified power. In use however your

mobile phone may operate at less than

full power because it is designed to

use only sufficient power to communi-

cate with the network.

frequency exposure requirements. For

more information about radio

frequency exposure, please visit the

FCC website at www.fcc.gov.

• Sanyo does not guarantee the safety

of data stored in the phone nor

accept responsibility for any

FCC Notice

This device is compliant with Part 15

of the FCC (Federal Communications

Commission) regulations which is

internationally recognised.

Operation is subject to the following

conditions: (1) This device may not

cause harmful interference, and (2)

This device must accept any interfer-

ence received, including interference

that may cause undesired operation.

problems resulting from loss of data.

• Several services are dependent on

Network services and may require

purchase and installation before use.

Some services or functions may

differ depending on the type of SIM/

USIM card used in your phone.

Contact Orange for details.

Additional Notices

• Music, Java™ games, pictures, or

video images which are protected by

purpose other than individual

enjoyment unless suitable permis-

sion has been obtained.

• This mobile phone is equipped with

a camera and can be used to send

or receive photographs or video

images. Be aware of Copyright

issues when using this function.

• Do not use the camera in places

where photography is restricted or

forbidden.

• The contents of this guide are

subject to change without notice.

To maintain compliance with FCC

radio frequency exposure require-

ments, body worn operations are

restricted to belt clips, or similar

accessories that contain no metallic

components and that provide at least

1.5 cm separation between the

device, including its antenna whether

extended or retracted, and the user’s

body. Use of non-Orange approved

accessories may violate FCC radio

194

195

Specifications

Size

108 (H) × 50 (W) × 22 (D) mm

Weight

121 g

170 minutes (in UMTS area)

190 minutes (in GSM area)

Talk Time∗

Standby Time∗

Display

210 hours (in UMTS area)

180 hours (in GSM area)

260 k colour TFT 2.4 inch

(240 × 320 dots)

Index

CMOS 1.3 megapixel

(rear camera)

CCD 310 kpixel

(front camera)

Cameras

E-GSM 900 Class 4

DCS 1800 Class 1

PCS 1900 Class 1

UMTS 2100 Class 3

Bands Supported

Max. Storage Capacity 8 MB

∗ These figures depend on the area your phone is used.

196

197

Index

Calendar ... 138

ABC Search ... 60

Alarm clock ... 146

Answer phone ... 132

Anti-nuisance function (Echo Party

Voice) ... 10, 33

Call Barring ... 130

Call Diverting ... 128

Call history

Dialled call history ... 11

Missed call history ... 12

Received call history ... 12

Call Quality Alarm ... 130

Call time ... 12

Call Waiting ... 131

Caption ... 85

Changing handset’s security

code ... 126

Email ... 78

Key Light ... 110

Fixed Dialling Number ... 132

Flicker-free ... 32, 50

Flight Mode ... 116

Frame ... 48, 89

Light ... 110

Line 2 ... 115

Auto Answer

Voice call ... 129

Video call ... 135

Auto Flash ... 45

Auto Power ON/OFF ... 121

Media Player ... 153

Messaging ... 68

Media Album ... 82

Mute ... 10

Hands-free ... 13, 133

Help guide ... 158

Hold settings ... 129

Backlight ... 110

Backup ... 95

Chapter ... 86

Character input ... 16, 109

Code (handset’s security code) ... 126

Contacts ... 59

Name Search ... 61

Notes ... 151

Bluetooth

Image format ... 85

Index Print ... 98, 184

Infrared ... 179

Receiving Mode ... 181

Password authentication ... 178

Receiving data ... 172

Settings ... 176

Orange World ... 160

Owner Information ... 64

Bookmarks ... 160

Browser settings ... 121

Date stamp ... 49

Delivery Report ... 73, 77

Dial Note ... 152

Java™ Games ... 164

Digital Camera Folder ... 97

DPOF Print ... 97, 184

Paste Image ... 85

Pause Dialling ... 15

Calculator ... 148

198

199

Index

Picture Message ... 77

PIN ... 126

Power Saving ... 110

Privacy Mode ... 62, 125

Profiles ... 13, 108

Shutter tone ... 50

Signature ... 71

SIM Toolkit ... 158

Skins ... 51

Slide activation ... 121

Snooze mode ... 147

Special effects ... 49

Speed dial ... 8, 28

Stamp ... 89

Standard text input ... 18

Standard Print ... 98, 184

Switching camera lens ... 31, 45, 136

Synchronisation ... 181

USB ... 185

USIM ... 126

vCalendar ... 168

vCard ... 168

Video call ... 26

Video List ... 85

vNote ... 168

Voice recorder ... 149

vTo Do ... 168

Read Report ... 73

Recording without sounds ... 50

Reducing noise ... 107

Rejecting calls ... 128

Rerecording voice ... 149

Restriction settings ... 124

Wallpaper ... 109, 111

WAP profiles ... 118

Whisper mode ... 10

White balance ... 32, 46

Worldclock ... 152

Saving size ... 48

T9 ... 18

Scaling ... 84

Schedule ... 139

Text entry ... 16

Text Message ... 68

To Do ... 143

Transferring the phone data ... 175

Transmitting the SD card data (USB

Storage Mode) ... 185

SD (Memory) card ... 92

Selecting network ... 117

Self-timer ... 47

Service Dialling Numbers ... 133

Setting time & date ... 112

Shooting time ... 47

Zooming ... 31

200

201

JBlend and all JBlend-

based trademarks and

logos are trademarks or

registered trademarks of

Aplix Corporation in Japan

and other countries.

(96927260.8), 1 010 057

(98903671.0), 1 018 069

Patents and copyright

(98950708.2); Republic of Korea

Pat. Nos. KR201211B1 and

KR226206B1. People’s Republic of

China Pat. Application Nos.

98802801.8, 98809472.X and

96196739.0; Mexico Pat. No.

208141; Russian Federation Pat.

No. 2206118; and additional patents

are pending worldwide.

This product utilizes iType

and Scaleable type outlines

licensed from Monotype

Imaging Inc.

Monotype Imaging Inc. All

rights reserved.

Openwave, the Openwave

logo and the family of terms

carrying the “Openwave”

prefix are trademarks of

Openwave Systems Inc. All

other trademarks and

registered trademarks are

the properties of their

respective owners.

Licensed by QUALCOMM Incorpo-

rated under one or more of the

following United States Patents and/or

their counterparts in other nations:

• T9 Text Input is licensed under one

or more of the following: U.S. Pat.

Nos. 5,187,480, 5,818,437,

5,945,928, 5,953,541, 6,011,554,

6,286,064, 6,307,548, 6,307,549,

and 6,636,162, 6,646,573;

Australian Pat. Nos. 727539,

746674, and 747901; Canadian Pat.

Nos. 1,331,057, 2,302,595, and

2,227,904; Japan Pat. No.

• T9 Text Input is a registered

trademark of Tegic Communications

Inc.

4,901,307

5,504,773

5,109,390

5,535,239

5,267,262

5,600,754

5,416,797

5,490,165

5,101,501

5,511,073

5,267,261

5,568,483

5,414,796

5,659,569

5,056,109

5,506,865

5,228,054

5,544,196

5,337,338

5,657,420

5,710,784

• End User is granted no rights of

ownership or any other proprietary

rights in or to the Documentation

and Tegic Product or any other

software or technology of Tegic. End

User acknowledges that all

The “RSA Secure” AND

“Genuine RSA” logos are

trademarks of RSA Data

Security, Inc.

5,778,338

Java™ and all Java-based

marks are trademarks or

registered trademarks of

Sun Microsystems, Inc. in

the U.S. and other

3532780, 3492981; United Kingdom

Pat. No. 2238414B; Hong Kong

Standard Pat. No. HK1010924;

Republic of Singapore Pat. No.

51383, 66959, and 71979;

ownership of and proprietary rights

in and to the Documentation and

Tegic Product are vested in Tegic.

End User shall not modify, reverse

engineer, decompile or disassemble

the Tegic Product, or otherwise

countries.

European Pat. Nos. 0 842 463

202

203

attempt to obtain source code for

the Tegic Product. The Documenta-

tion and Tegic Product are protected

by the copyright laws of the United

States and international copyright

treaties.

Bluetooth is a registered trademark of

Bluetooth SIG, Inc.

Your SANYO product is designed and manufactured with high

quality materials and components which can be recycled and

reused.

This symbol means that electrical and electronic equipment, at their

end-of-life, should be disposed of separately from your household waste.

Please dispose of this equipment at your local community waste

collection/recycling centre.

Intellisync and the

Intellisync logo are

trademarks of Intellisync

Corporation that may be

registered in some

jurisdictions.

In the European Union there are separate collection systems for used

electrical and electronic products.

Please help us to conserve the environment we live in!

PacketVideo, PV, and pvPlayer are

trademarks or registered trademarks

of PacketVideo Corporation. All other

trademarks are the property of their

respective owners. The names of

actual companies and products

mentioned herein may be the

trademarks of their respective owners.

204

205

RCA Car Satellite Radio System ANT711 User Guide
RCA CRT Television 20F610TD User Guide
Rolls Stereo Receiver RA280 User Guide
Rotel Stereo Amplifier RA971 User Guide
Russell Hobbs Microwave Oven RHM1709B G User Guide
Samsung Flat Panel Television HPL5025 User Guide
Sanyo Heat Pump 18KHS22 User Guide
Sceptre Technologies Flat Panel Television E420BV F120 User Guide
Scientific Atlanta DVR 3250HDTM User Guide
Sears Fitness Equipment 831159231 User Guide